![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC1675G GENERAL PURPOSE WIDE BNAD AMPLIFIER DESCRIPTION The PC1675G is a silicon monolithic integrated circuit employing small package (4pins mini mold) and designed for use as a wide bnad amplifier convers from HF band to UHF band. FEATURES * Excellent frequency response : 1.9 GHz TYP. @ 3 dB down below flat gain. * High isolation. * Super small package. * Uni- and low voltage operation : VCC = 5 V * Input and output matching 50 . ABSOLUTE MAXIMUM RATINGS (TA = 25 C) Supply Voltage Total Power Dissipation Operating Temperature Storage Temperature VCC PT Topt Tstg 6 200 -40 to +85 -55 to +150 V mW C C ELECTRICAL CHARACTERISTICS (TA = 25 C, VCC = 5 V) CHARACTERISTIC Circuit Current Power Gain Noise Figure Upper Limit Operating Frequency Isolation Input Return Loss Output Return Loss Maximum Output Level SYMBOL ICC GP NF fu ISL RLin RLout PO 1.6 21 9 8 2 MIN. 12 10 TYP. 17 12 5.5 1.9 25 12 11 4 MAX. 22 14 7.0 UNIT mA dB dB GHz dB dB dB dBm TEST CONDITIONS No Signal f = 0.5 GHz f = 0.5 GHz 3 dB down below flat gain f = 0.5 GHz f = 0.5 GHz f = 0.5 GHz f = 0.5 GHz, Pin = 0 dBm NEC cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Document No. P12446EJ2V0DS00 (2nd edition) (Previous No. IC-1890) Date Published March 1997 N Printed in Japan (c) 1989 PC1675G TYPICAL CHARACTERISTICS (TA = 25 C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE 25 ICC-Circuit Current-mA 20 ICC-Circuit Current-mA 30 CIRCUIT CURRENT vs. OPERATING TEMPERATURE 20 15 10 5 10 0 0 1 2 3 4 5 6 VCC-Supply Voltage-V -50 0 50 100 Topt-Operating Temperature-C 20 GP-Insertion Power Gain-dB 10 NF-Noise Figure-dB 7.5 5 2.5 0 16 NOISE FIGURE AND INSERTION POWER GAIN vs. FREQUENCY GP-Insertion Power Gain-dB 20 16 12 INSERTION POWER GAIN vs. FREQUENCY VCC = 5 V TA = -40 C VCC = 5.5 V GP 12 NF 8 4.5 V 4 0 5.0 V +25 C 8 +85 C 4 0 60 100 200 500 1000 2000 60 100 200 500 1000 2000 f-Frequency-MHz f-Frequency-MHz REVERSE INSERTION GAIN vs. FREQUENCY 0 RLin-Input Return Loss-dB RLout-Output Return Loss-dB VCC = 5 V 0 INPUT AND OUTPUT RETURN LOSS vs. FREQUENCY VCC = 5 V ISL-Isolation-dB -10 -10 RLin RLout -20 -20 -30 60 100 200 500 1000 2000 -30 60 100 200 500 1000 2000 f-Frequency-MHz f-Frequency-MHz 2 PC1675G OUTPUT POWER vs. INPUT POWER 5 Po-Output Power-dBm VCC = 5 V, f = 500 MHz 0 -5 -10 -15 -20 -30 IM3-3rd Order Intermodulation Distortion-dBc THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE f1 = 500 MHz f2 = 504 MHz -50 -40 5.5 V -30 5.0 V 4.5 V -20 -25 -20 -15 -10 -5 0 Pin-Input Power-dBm -10 -20 -10 Pout-Output Power of Each Tone-dBm 0 S-PARAMETER VCC = 5 V, ZO = 50 f (MHz) 100 200 400 600 800 1000 1200 1400 1600 1800 2000 S11 0.284 0.287 0.270 0.228 0.178 0.136 0.120 0.122 0.124 0.114 0.085 S11 -27.1 -55.4 -114.3 -173.0 132.5 85.8 46.0 3.6 -45.4 -98.5 -55.6 S21 3.853 3.877 3.933 4.039 4.167 4.239 4.160 3.894 3.512 3.083 2.661 S21 -33.8 -67.6 -135.5 155.7 85.3 12.8 -61.0 -135.0 152.1 81.2 12.1 S12 0.065 0.064 0.059 0.054 0.052 0.053 0.060 0.068 0.078 0.088 0.098 S12 -27.0 -51.4 -98.3 -142.3 177.3 138.4 97.5 53.3 6.4 -42.4 -92.6 S22 0.225 0.235 0.266 0.294 0.305 0.283 0.229 0.156 0.084 0.048 0.067 S22 159.1 95.7 15.6 -60.1 -134.3 151.9 80.2 13.3 -40.9 -56.1 -75.0 3 PC1675G PACKAGE DIMENSIONS EQUIVALENT CIRCUIT +VCC PACKAGE DIMENSIONS (Units: mm) 0.4 -0.05 0.4 -0.05 2.8 -0.3 1.5 2 +0.2 +0.1 +0.1 +0.2 -0.1 OUT (1.8) 0.95 0.95 2.90.2 3 (1.9) IN 1 4 0.6 -0.05 5 5 0.4 -0.05 +0.1 +0.1 GND 0.16 -0.06 +0.2 -3.1 1.1 0.8 5 0 to 0.1 5 PIN CONNECTIONS 1. GND 2. OUTPUT 3. VCC 4. INPUT 4 +0.1 PC1675G [MEMO] 5 PC1675G [MEMO] 6 PC1675G [MEMO] 7 PC1675G No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |