|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k Rev. 02 -- 25 April 2005 Product data sheet 1. Product profile 1.1 General description NPN/PNP Resistor-Equipped Transistors (RET). Table 1: Product overview Package Philips PEMD15 PUMD15 SOT666 SOT363 JEITA SC-88 PNP/PNP complement PEMB15 PUMB15 NPN/NPN complement PEMH15 PUMH15 Type number 1.2 Features s s s s Built-in bias resistors Simplifies circuit design Reduces component count Reduces pick and place costs 1.3 Applications s Low current peripheral driver s Control of IC inputs s Replaces general-purpose transistors in digital applications 1.4 Quick reference data Table 2: Symbol VCEO IO R1 R2/R1 Quick reference data Parameter collector-emitter voltage output current (DC) bias resistor 1 (input) bias resistor ratio Conditions open base Min 3.3 0.8 Typ 4.7 1 Max 50 100 6.1 1.2 Unit V mA k Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 2. Pinning information Table 3: Pin 1 2 3 4 5 6 Pinning Description GND (emitter) TR1 input (base) TR1 output (collector) TR2 GND (emitter) TR2 input (base) TR2 output (collector) TR1 1 2 3 001aab555 TR1 R2 R1 R1 R2 TR2 Simplified outline 6 5 4 Symbol 6 5 4 1 2 3 006aaa143 3. Ordering information Table 4: Ordering information Package Name PEMD15 PUMD15 SC-88 Description plastic surface mounted package; 6 leads plastic surface mounted package; 6 leads Version SOT666 SOT363 Type number 4. Marking Table 5: PEMD15 PUMD15 [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China Marking codes Marking code [1] 5E D0* Type number 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 2 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO VI Parameter collector-base voltage collector-emitter voltage emitter-base voltage input voltage TR1 positive negative input voltage TR2 positive negative IO ICM Ptot output current (DC) peak collector current total power dissipation SOT363 SOT666 Tstg Tj Tamb Per device Ptot total power dissipation SOT363 SOT666 [1] [2] Conditions open emitter open base open collector Min - Max 50 50 10 +30 -10 +10 -30 100 100 200 200 +150 150 +150 Unit V V V V V V V mA mA mW mW C C C Per transistor; for the PNP transistor with negative polarity Tamb 25 C [1] [1] [2] -65 -65 storage temperature junction temperature ambient temperature Tamb 25 C [1] [1] [2] - 300 300 mW mW Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 3 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 6. Thermal characteristics Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient SOT363 SOT666 Per device Rth(j-a) thermal resistance from junction to ambient SOT363 SOT666 [1] [2] Conditions in free air [1] [1] [2] Min Typ Max Unit Per transistor - - 625 625 K/W K/W in free air [1] [1] [2] - - 416 416 K/W K/W Device mounted on a FR4 PCB, single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. 7. Characteristics Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO ICEO Parameter Conditions Min 30 2.5 3.3 0.8 Typ 1.1 1.9 4.7 1 Max 100 1 50 0.9 150 0.5 6.1 1.2 mV V V k Unit nA A A mA Per transistor; for the PNP transistor with negative polarity collector-base cut-off VCB = 50 V; IE = 0 A current collector-emitter cut-off current emitter-base cut-off current DC current gain collector-emitter saturation voltage VCE = 30 V; IB = 0 A VCE = 30 V; IB = 0 A; Tj = 150 C VEB = 5 V; IC = 0 A VCE = 5 V; IC = 10 mA IC = 10 mA; IB = 0.5 mA IEBO hFE VCEsat VI(off) VI(on) R1 R2/R1 Cc off-state input voltage VCE = 5 V; IC = 100 A on-state input voltage VCE = 0.3 V; IC = 20 mA bias resistor 1 (input) bias resistor ratio collector capacitance VCB = 10 V; IE = ie = 0 A; f = 1 MHz TR1 (NPN) TR2 (PNP) - - 2.5 3 pF pF 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 4 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 103 hFE 006aaa030 1 006aaa031 (1) (2) (3) VCEsat (V) 102 10-1 (1) (2) (3) 10 1 10-1 1 10 IC (mA) 102 10-2 1 10 IC (mA) 102 VCE = 5 V (1) Tamb = 150 C (2) Tamb = 25 C (3) Tamb = -40 C IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C Fig 1. TR1 (NPN): DC current gain as a function of collector current; typical values 10 006aaa032 Fig 2. TR1 (NPN): Collector-emitter saturation voltage as a function of collector current; typical values 10 006aaa033 VI(on) (V) (1) VI(off) (V) (1) 1 (2) (3) 1 (2) (3) 10-1 10-1 1 10 IC (mA) 102 10-1 10-2 10-1 1 IC (mA) 10 VCE = 0.3 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C VCE = 5 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C Fig 3. TR1 (NPN): On-state input voltage as a function of collector current; typical values Fig 4. TR1 (NPN): Off-state input voltage as a function of collector current; typical values 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 5 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 103 hFE (2) 006aaa213 -1 006aaa214 (1) VCEsat (V) 102 (3) -10-1 (2) (1) (3) 10 1 -10-1 -1 -10 I C (mA) -102 -10-2 -1 -10 I C (mA) -102 VCE = -5 V (1) Tamb = 150 C (2) Tamb = 25 C (3) Tamb = -40 C IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C Fig 5. TR2 (PNP): DC current gain as a function of collector current; typical values -10 006aaa215 Fig 6. TR2 (PNP): Collector-emitter saturation voltage as a function of collector current; typical values -10 006aaa216 VI(on) (V) (1) VI(off) (V) (1) -1 (2) (3) -1 (2) (3) -10-1 -10-1 -1 -10 I C (mA) -102 -10-1 -10-2 -10-1 -1 I C (mA) -10 VCE = -0.3 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C VCE = -5 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C Fig 7. TR2 (PNP): On-state input voltage as a function of collector current; typical values Fig 8. TR2 (PNP): Off-state input voltage as a function of collector current; typical values 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 6 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 8. Package outline 2.2 1.8 6 5 4 0.45 0.15 1.1 0.8 6 1.7 1.5 5 4 0.3 0.1 0.6 0.5 2.2 1.35 2.0 1.15 pin 1 index 1.7 1.5 1.3 1.1 pin 1 index 1 0.65 1.3 Dimensions in mm 2 3 0.3 0.2 0.25 0.10 04-11-08 Dimensions in mm 1 0.5 1 2 3 0.27 0.17 0.18 0.08 04-11-08 Fig 9. Package outline SOT363 (SC-88) Fig 10. Package outline SOT666 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description PEMD15 PUMD15 SOT666 SOT363 2 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel; T1 4 mm pitch, 8 mm tape and reel; T2 [1] [2] [3] [2] [3] Packing quantity 3000 4000 -115 -125 -115 8000 -315 10000 -135 -165 For further information and the availability of packing methods, see Section 15. T1: normal taping T2: reverse taping 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 7 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 10. Revision history Table 10: Revision history Release date 20050425 Data sheet status Product data sheet Change notice Doc. number 9397 750 14215 Supersedes PUMD15_1 Document ID PEMD15_PUMD15_2 Modifications: * * * * * * The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. Type PEMD15 added Table 8 "Characteristics": Vi(on) and Vi(off) redefined to VI(on) and VI(off) Figure 1, 2, 3, 4, 5, 6, 7 and 8: electrical graphs for TR1 (NPN) and TR2 (PNP) added Section 9 "Packing information": added Section 14 "Trademarks": added Product specification 9397 750 11864 - PUMD15_1 20040204 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 8 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 11. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 14215 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 02 -- 25 April 2005 9 of 10 Philips Semiconductors PEMD15; PUMD15 NPN/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 4.7 k 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 3 4 4 7 7 8 9 9 9 9 9 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 25 April 2005 Document number: 9397 750 14215 Published in The Netherlands |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |