 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Intelligent Power Devices (IPDs) MIP508 Silicon MOS IC s Features q 3-pin intelligent power device q Five protective functions (over-current, over-voltage, short circuit load, over heat, ESD) are integrated q Acceptable both AC and DC power supply 2.60.1 unit: mm 4.50.1 1.60.2 1.50.1 s Applications q For lamp and solenoid drive 0.4max. 45 s Absolute Maximum Ratings (Ta = 25C) Parameter Output voltage Output peak current Output current Input voltage Input current Drain clamp energy Allowable power dissipation Channel temperature Storage temperature *1 *2 1.0-0.2 +0.1 Symbol VDS IOP TC = 25C TC = 85C IO VIN IIN ECLP TC = 25C Ta = 25C Ta = 85C Tch Tstg PD Ratings 40 3 1 1 - 0.5 to 6 5 24 *1 2 1 *2 0.52*2 -40 to +150 -55 to +150 Unit V A 0.40.08 0.50.08 1.50.1 3.00.15 3 2 1 4.0-0.20 0.40.04 A V mA mJ 1: IN 2: Drain 3: Source EIAJ: SC-62 Mini-Power Type Package (3-pin) marking W C C L = 10mH, VDD = 20V, IL = 2.19A, TC = 25C, 1pulse Mounting on the PCB (the copper foil of the drain portion should have a area of 100mm2 or more and the board thickness should be 1.7mm.) s Block Diagram D Short circuit load protection Over voltage protection IN ESD protection Gate cut-off circuit Over heat protection Over current protection S 2.50.1 +0.25 1 Intelligent Power Devices (IPDs) s Electrical Characteristics (TC = 25 3C) Parameter Drain to Source ON-resistance Drain to Source ON-voltage Drain clamp voltage Drain OFF current (1) Drain OFF current (2) Input voltage (High) Input voltage (Low) Input current Over current protection limit Short circuit load protection limit Symbol RDS(on) VDS(on) VDS(CLP) IDS(off)1 IDS(off)2 VIN(H) VIN(L) IIN(on) IOCP VDS(SHT) Conditions VIN = 5V, IDS = 1A VIN = 5V, IDS = 1A VIN = 0, IDS = 3mA VIN = 0, VDS = 12V VIN = 0, VDS = 16V IDS = 1A IDS = 1mA VIN = 5V, VDS = 0 VIN = 5V VIN = 5V 2 2 0.15 3 4 10 4 0.8 0.5 40 min typ 0.5 0.5 49 50 70 max 1.1 1.1 58 120 180 MIP508 Unit V V A A V V mA A V Note: The oscillation of the output current is caused when the drain voltage exceeds the short circuit load detection voltage under the ON state of output. s Electrical Characteristics (TC = 25 3C) Parameter Over heat protection temperature Symbol TSHD VIN = 5V Conditions min 160 typ 190 max Unit C Note 1: The above values of characteristics are not guaranteed values and are only references for designing. Note 2: If the chip temperature exceeds the "Over Heat Protection Temperature", output current is shut down. s Timing Chart VIN VDS IDS ON state Over current limiting state Short circuit Over heat protection load state operating state Over heat latch Detecting over heat ON state OFF state Latch cancel Detecting short circuit load 2 |
Price & Availability of MIP508
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |