|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1.0x0.5mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHH1005RWF/A WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Features 1.0mmx0.5mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE: 2000PCS / REEL . ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY: 12.9 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications traffic signaling. backlighting (illuminated advertising , general lighting). interior and exterior automotive lighting. substitution of micro incandescent lamps. reading lamps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. Package Dimensions indoor and outdoor commercial and residential architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 1 OF 7 ERP: 1203005570 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. APHH1005RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 Typ. 140 Note2 v (mlm) @ 20 mA Typ. 850 Note3 Viewing Note1 Angle 21/2 170 Absolute Maximum Ratings at TA=25C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 114 5 110 -40 To +85 -40 To +100 30 100 280 160 Unit mW V C C C mA mA C/W Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 /C 10-3 /C Temperature coefficient of x IF=20mA, -10C T100C [Typ.] Temperature coefficient of y IF=20mA, -10C T100C [Typ.] Temperature coefficient of VF IF=20mA, -10C T100C [Typ.] VF Note2 Symbol X Y Note1 Value 0.33 0.34 2.7 3.3 3.8 0.01 Unit - Note1 V Reverse Current (VR=5V) A TCy -0.2 TCV -2.5 mV/C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 2 OF 7 ERP: 1203005570 Brightness codes luminous Intensity Iv(mcd) @ 20 mA Code. M N P Q Min. 70 110 180 280 Note1 v (mlm) @ 20 mA Max. 130 220 320 420 Typ. 400 600 750 920 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APHH1005RWF/A SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 3 OF 7 ERP: 1203005570 APHH1005RWF/A SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 4 OF 7 ERP: 1203005570 APHH1005RWF/A SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 5 OF 7 ERP: 1203005570 APHH1005RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 6 OF 7 ERP: 1203005570 PACKING & LABEL SPECIFICATIONS APHH1005RWF/A SPEC NO: DSAG6504 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE:JUL/15/2006 DRAWN:Y.L.LI PAGE: 7 OF 7 ERP: 1203005570 |
Price & Availability of APHH1005RWFA | |||||||||||
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |