View DWW-UJG-W1_1235352.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DOMINANT
Semiconductors
Innovating Illumination
TM
DATA SHEET:
Power DomiLEDTM
InGaN White : DWW-UJG
Power DomiLED
TM
With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLEDTM truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals.
Features:
> > > > > > > High brightness surface mount LED. Long lifetime up to 50,000 hours due to silicone encapsulation. 120 viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance.
Applications:
> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). Lighting: architecture lighting, general lighting, garden light, etc
> > >
(c) 2005 DomiLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice.
1
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Part Ordering Number
DWW-UJG-VW1-1 * DWW-UJG-V1 * DWW-UJG-V2 * DWW-UJG-W1
Chip Technology / Color
InGaN White
Viewing Angle
120
Total Flux @ IF=30mA, mlm
2100 - 4150
Luminous Intensity @ IF = 30mA IV (mcd)
715.0 - 1400.0 715.0 - 900.0 900.0 - 1125.0 1125.0 - 1400.0
NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups may also be available upon request. 3. Luminous intensity is measured with an accuracy of 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance current pulsing should is used for dimming purposes. 6. An optional Vf bining is also available upon request. Bining scheme is as per following table. 6. Data provided for luminous flux is based on approximation.
2
08/01/2007 V(O)
DOMINANT TM
Innovating Illumination
Semiconductors
InGaN White : DWW-UJG
Electrical Characteristics at Ta=25C
Part Number
DWW
Min. (V)
3.05
Vf @ If = 30mA Typ. (V) Max. (V)
3.40 4.00
Vr @ Ir = 10uA Min. (V)
5
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of 0.1V.
Vf Bining (Optional)
Vf @ If = 30mA
3A 30 31 32
Forward Voltage (V)
3.05 ... 3.35 3.35 ... 3.65 3.65 ... 3.95 3.95 ... 4.25
Forward voltage, Vf is measured with an accuracy of 0.1V. Please consult sales and marketing to incorporate special part number to incorporate Vf binning.
Absolute Maximum Ratings
Maximum Value
DC forward current Peak pulse current; (tp 10s, Duty cycle = 0.1) Reverse voltage; Ir (max) = 10A ESD Threshold (HBM) LED junction temperature Operating temperature Storage temperature Power dissipation (at room temperature) 50 200 5 2 125 -40 ... +110 -40 ... +110 200
Unit
mA mA V kV C C C mW
3
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
DWW, White Color Grouping
Dominant White Bin Structure
0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.27
* * *
0.28
A1 A2
* * *
0.29
A3 A4
* * *
C1 C2
* * *
C3 C4
* * *
E1 E2
* * *
E3 E4
* * *
0.30
0.31
0.32
0.33
0.34
0.35
0.36
Chromaticity coordinate groups are measured with an accuracy of 0.01.
Bin
A1 A2 A3 A4 C1 C2 C3 C4 Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy 0.2775 0.2732 0.2775 0.2557 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179
W
0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3386 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.2775 0.2907 0.2775 0.2732 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354
Bin
E1 E2 E3 E4 Cx Cy Cx Cy Cx Cy Cx Cy 0.3275 0.3561 0.3275 0.3386 0.3400 0.3768 0.3400 0.3593
X
0.3400 0.3768 0.3400 0.3593 0.3525 0.3975 0.3525 0.3800 0.3400 0.3943 0.3400 0.3768 0.3525 0.4150 0.3525 0.3975 0.3275 0.3736 0.3275 0.3561 0.3400 0.3943 0.3400 0.3768
Dominant color coordinate is measured with an accuracy of 0.01.
4
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Relative Intensity Vs Forward Current
Relative Intensity; Normalized at 30mA Relative Intensity
2.5
Forward Current Vs Forward Voltage
60 50 40 30 20 10 0
1.5
1
0.5
0
Forward Current, mA
2
0
20
40
60
80
100
2.5
3
3.5
4
4.5
Forward Current, mA
Forward Voltage, V
Maximum Forward Current Vs Temperature
55 50 45
Wavelength Vs Forward Current
1 0.9 0.8
Temp. Solder Point, Ts
Forward Current, mA
40 35 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 90 100 110
Relative Intensity
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 400 450 500 550 600 650 700 750 800
Temp. Ambient, Ta
Temperature
Wavelength, nm
Radiation Pattern
30 20 10 0
1.0
40
0.8
50
0.6
60 70 80 90
0.4
0.2
0
5
08/01/2006 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Power DomiLED * InGaN White : DWW-UJG Package Outlines
TM
6
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Recommended Solder Pad
7
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Taping and orientation
* Reels come in quantity of 2000 units. * Reel diameter is 180 mm.
8
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Packaging Specification
9
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT Semiconductors
LOT NO : lotno
ROHS Compliant PB Free
S/N : xxx D/C: xxxx
PART NO : partno QTY : qty GROUP : group
Reel Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
Weight (gram) Weight (gram) 0.034 0.034
1 completed bag (2000pcs)
190 10 190 10
DOMINANT TM
Semiconductors
Cardboard Box
For Power DomiLED
Cardboard Box Size
Small Large
TM
Dimensions (mm)
Empty Box Weight (kg)
0.58 1.74
Reel / Box
Quantity / Box (pcs)
300 x 250 x 250 416 x 516 x 476
15 reels MAX 55 reels MAX
30,000 MAX 110,000 MAX
10
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Recommended Sn-Pb IR-Reflow Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
275 250 225 200 Ramp-up 3C/sec max. 235-240C 10-30s
Temperature (C)
175 150 125 100 75 50 25 0 50 100 150 200 Preheat 60-120s 360s max Rampdown 6C/sec max. 183C 60-150s
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300 275 250 225 217C Ramp-up 3C/sec max. 255-260C 10-30s
Temperature (C)
200 175 150 125 100 75 50 25 0 50 Preheat 60-180s 480s max 100 150 200 Rampdown 6C/sec max. 60-150s
Time (sec)
11
08/01/2007 V(O)
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-UJG
Revision History
Page Subjects Initial Release Date of Modification 08 Jan 2007
NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors.
12
08/01/2007 V(O)
DOMINANT TM
Innovating Illumination
Semiconductors
InGaN White : DWW-UJG
About Us DOMINANT Semiconductors is a dynamic Malaysian Corporation that is among the world's leading SMT LED Manufacturers. An excellence - driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT's extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT's state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Semiconductors can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information: Head Quarter DOMINANT Semiconductors Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: sales@dominant-semi.com
DOMINANT China Sales Office DOMINANT Semiconductors (Shenzhen) Co. Ltd. 24BC Newbaohui Building, No. 1007 West Nanhai Blvd., Nanshan, Shenzhen, China P.C. 518054 Tel: +86 (755) 86031785 / +86 (755) 86031786 Fax: +86 (755) 86031789 E-mail: sales_china@dominant-semi.com
DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. 902 Sunil Technopia, 440 Sangdaewon-dong, Jungwon-gu, Sungnam-si, Kyunggi-do, Korea 462726 Tel: 82-31-777-3978 Fax: 82-31-777-3976 E-mail: sales_korea@dominant-semi.com
Semiconductors
Innovating Illumination
DOMINANT
TM

▲Up To Search▲

Price & Availability of DWW-UJG-W1

	To Download DWW-UJG-W1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .