|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VISHAY FE5A / 5B / 5C / 5D Vishay Semiconductors Ultra Fast Sinterglass Diode Features * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Superfast recovery time for high efficiency * Low forward voltage, high current capability * Hermetically sealed package * Low leakage current * High surge current capability 17133 Mechanical Data Case: Sintered glass case, G-4 Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: approx. 1040 mg Parts Table Part FE5A FE5B FE5C FE5D Type differentiation VRRM = 50 V VRRM = 100 V VRRM = 150 V VRRM = 200 V G-4 G-4 G-4 G-4 Package Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Reverse voltage = Repetitive peak reverse voltage Test condition see electrical characteristics Part FE5A FE5B FE5C FE5D Maximum average forward rectified current Peak forward surge current 0.375 " (9.5 mm) lead length at TL = 55 C 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Symbol VR = VRRM VR = VRRM VR = VRRM VR = VRRM IF(AV) IFSM Value 50 100 150 200 5.0 135 Unit V V V V A A Operating junction and storage temperature range TJ, TSTG - 55 to + 175 C Document Number 86071 Rev. 1.3, 11-Aug-04 www.vishay.com 1 FE5A / 5B / 5C / 5D Vishay Semiconductors Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Typical thermal resistance 1) 2) 1), 2) VISHAY Test condition Symbol RJA RJL Value 60 20 Unit K/W K/W Thermal resistance from junction to lead 0.375 " (9.5 mm) lead length with both leads attached to heatsinks. Thermal resistance from junction to ambient at 0.375 " (9.5 mm) lead length and mounted on P.C.B. Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Maximum instantaneous forward voltage Maximum reverse current Test condition IF = 5.0 A VR = VRRM, Tamb = 25 C VR = VRRM, Tamb = 100 C Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Typical junction capacitance VR = 4 V, f = 1 MHz Symbol VF IR IR trr Cj 100 Min Typ. Max 0.95 5.0 50 35 Unit V A A ns pF Typical Characteristics (Tamb = 25 C unless otherwise specified) 6.0 Average Forward Rectified Current (A) 175 Resistive or Inductive Load Peak Forward Surge Current (A) 150 125 100 75 50 25 0 1 TJ = TJ max. 8.3ms Single Half Sine-W ave (JEDEC Method) 4.0 L 0.375" (9.5mm) 2.0 0 0 25 50 75 100 125 150 175 gfe5a_02 10 100 gfe5a_01 Ambient T emperature (C) Number of Cycles at 60 HZ Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Document Number 86071 Rev. 1.3, 11-Aug-04 VISHAY FE5A / 5B / 5C / 5D Vishay Semiconductors 100 Instantaneous Forward Current (A) 10 1 0.1 TJ = 25C Pulse Width = 300s 1% Duty Cycle 0.01 0.4 gfe5a_03 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Instantaneous Reverse Leakage Current (A) 1,000 100 10 TJ = 125C 1 TJ = 100C 0.1 TJ = 25C 0.01 0 gfe5a_04 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics 250 TJ = 25C f = 1.0 MHZ Vsig = 50mVp-p Junction Capacitance (pF) 200 150 100 50 0 0.1 gfe5a_05 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Document Number 86071 Rev. 1.3, 11-Aug-04 www.vishay.com 3 FE5A / 5B / 5C / 5D Vishay Semiconductors Package Dimensions in mm (Inches) VISHAY 4.6 (0.180) 2.9 (0.115) DIA. 25.4 (1.0) MIN. 7.6 (0.300) MAX. 1.07 (0.042) 0.962 (0.038) DIA. 17032 25.4 (1.0) MIN. www.vishay.com 4 Document Number 86071 Rev. 1.3, 11-Aug-04 VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to FE5A / 5B / 5C / 5D Vishay Semiconductors 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 86071 Rev. 1.3, 11-Aug-04 www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1 |
Price & Availability of FE5D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |