![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2SK2719 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (-MOSIII) 2SK2719 Chopper Regulator, DC-DC Converter and Motor Drive Applications * * * * Low drain-source ON resistance: RDS (ON) = 3.7 (typ.) High forward transfer admittance: |Yfs| = 2.6 S (typ.) Low leakage current: IDSS = 100 A (max) (VDS = 720 V) Enhancement mode: Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) Unit: mm Absolute Maximum Ratings (Ta = 25C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage DC Drain current (Note 1) Pulse (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR (Note 3) Channel temperature Storage temperature range EAR Tch Tstg Rating 900 900 30 3 A 9 125 295 3 12.5 150 -55~150 W mJ A mJ C C Unit V V V 1. Gate 2. Drain (heat sink) 3. Source JEDEC JEITA TOSHIBA SC-65 2-16C1B Drain power dissipation (Tc = 25C) Single pulse avalanche energy (Note 2) Avalanche current Repetitive avalanche energy Weight: 4.6 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Thermal resistance, channel to case Thermal resistance, channel to ambient Symbol Rth (ch-c) Rth (ch-a) Max 1.0 50.0 Unit C/W C/W Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: VDD = 25 V, Tch = 25C (initial), L = 58 H, RG = 25 , IAR = 45 A Note 3: Repetitive rating: pulse width limited by maximum junction temperature This transistor is an electrostatic-sensitive device. Please handle with caution. 1 2006-11-10 2SK2719 Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Gate-source breakdown voltage Drain cut-off current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Symbol IGSS V (BR) GSS IDSS V (BR) DSS Vth RDS (ON) Yfs Ciss Crss Coss tr VGS Turn-on time Switching time Fall time tf ton 10 V 0V 4.7 VDS = 25 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 30 V, VDS = 0 V IG = 10 A, VDS = 0 V VDS = 720 V, VGS = 0 V ID = 10 mA, VGS = 0 V VDS = 10 V, ID = 1 mA VGS = 10 V, ID = 1.5 A VDS = 20 V, ID = 1.5 A Min 30 900 2.0 0.65 VOUT 55 ns 30 Typ. 3.7 2.6 750 10 70 15 Max 10 100 4.0 4.3 Unit A V A V V S pF pF pF ID = 1.5 A RL = 133 VDD 200 V - Duty < 1%, tw = 10 s = Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge Gate-drain ("miller") charge toff 110 Qg Qgs Qgd VDD 400 V, VGS = 10 V, ID = 3 A - 25 13 12 nC nC nC Source-Drain Diode Ratings and Characteristics (Ta = 25C) Characteristics Continuous drain reverse current (Note 1) Pulse drain reverse current (Note 1) Diode forward voltage Reverse recovery time Reverse recovery charge Symbol IDR Test Condition Min Typ. Max 3 Unit A IDRP VDSF trr Qrr IDR = 3 A, VGS = 0 V IDR = 3 A, VGS = 0 V dIDR/dt = 100 A/s 1100 7.5 9 -1.9 A V ns C Marking TOSHIBA K2719 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-10 2SK2719 ID - VDS 5 Common source Tc = 25C Pulse test 5 8 10 6 5.25 4 5.5 10 ID - VDS 8 6 5.75 3 5.5 2 5.25 5 1 VGS = 4 V VGS = 4.5 V 0 0 Common source Tc = 25C Pulse test 4 Drain current ID (A) 3 5 2 4.75 4.5 1 0 0 4 8 12 16 20 Drain current ID (A) 10 20 30 40 50 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID - VGS 6 Common source VDS = 20 V Pulse test 25 VDS - VGS Common source Tc = 25C Pulse test VDS (V) Drain-source voltage 5 Tc = -55C 25 20 Drain current ID (A) 4 15 3 ID = 3 A 100 10 1.5 5 0.8 2 1 0 0 2 4 6 8 10 12 0 0 4 8 12 16 20 Gate-source voltage VGS (V) Gate-source voltage VGS (V) Yfs - ID (S) 10 5 3 100 0.1 0.5 0.3 Common source VDS = 20 V Pulse test 0.1 0.1 0.3 1 3 10 30 Tc = -55C 25 30 Common source Tc = 25C VGS = 10 V Pulse test RDS (ON) - ID Drain-source ON resistance RDS (ON) () Forward transfer admittance Yfs 10 5 3 1 0.5 0.1 0.3 1 3 10 30 Drain current ID (A) Drain current ID (A) 3 2006-11-10 2SK2719 RDS (ON) - Tc () 20 Common source VGS = 10 V Pulse test 10 5 Common source Tc = 25C Pulse test IDR - VDS Drain-source ON resistance RDS (ON) (A) Drain reverse current IDR ID = 3 A 1.5 0.8 16 3 1 0.5 0.3 10 0.1 0.05 0.03 5 1 VGS = 0, -1 V 3 12 8 4 0 -80 -40 0 40 80 120 160 0.01 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 Case temperature Tc (C) Drain-source voltage VDS (V) Capacitance - VDS 2000 1000 500 300 Ciss 5 Vth - Tc Common source VDS = 10 V ID = 1 mA Pulse test Vth (V) Gate threshold voltage 100 4 (pF) Capacitance C 3 100 Coss 50 30 Common source VGS = 0 V f = 1 MHz Tc = 25C Pulse test 0.3 1 3 10 30 2 10 5 0.1 Crss 1 0 -80 -40 0 40 80 120 160 Drain-source voltage VDS (V) Case temperature Tc (C) PD - Tc 150 500 Dynamic Input/Output Characteristics Common source Tc = 25C ID = 3 A Pulse test VDS 300 200 200 400 8 VDD = 100 V 12 20 Drain power dissipation PD (W) VDS (V) 400 16 100 Drain-source voltage 50 100 VGS 4 0 0 40 80 120 160 0 0 8 16 24 32 0 40 Case temperature Tc (C) Total gate charge Qg (nC) 4 2006-11-10 Gate-source voltage VGS (V) 2SK2719 rth - tw 3 Normalized transient thermal impedance rth (t)/Rth (ch-c) 1 0.5 0.3 Duty = 0.5 0.2 0.1 0.1 0.05 0.03 0.01 0.01 0.005 0.003 10 100 1m 10 m 100 m 0.05 0.02 Single pulse PDM t T Duty = t/T Rth (ch-c) = 1.0C/W 1 10 Pulse width tw (s) Safe Operating Area 30 ID max (pulsed)* 500 EAS - Tch Avalanche energy EAS (mJ) 10 100 s* 400 3 ID max (continuous) 1 ms* Drain current ID (A) 300 1 0.5 0.3 DC operation Tc = 25C 200 100 0.1 0.05 0.03 *: Single nonrepetitive pulse Tc = 25C Curves must be derated linearly with increase in temperature. 3 10 30 100 0 25 50 75 100 125 150 Channel temperature (initial) Tch (C) VDSS max 300 1000 0.01 1 Drain-source voltage VDS (V) 15 V -15 V BVDSS IAR VDD VDS Test circuit RG = 25 VDD = 90 V, L = 60 mH Wave form 1 2 B VDSS AS = *L*I * B 2 - VDD VDSS 5 2006-11-10 2SK2719 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2006-11-10 |
Price & Availability of 2SK271906
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |