![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MC10H424 Quad TTL to ECL Translator with ECL Strobe The MC10H424 is a Quad TTL-to-ECL translator with an ECL strobe. Power supply requirements are ground, +5.0 volts, and -5.2 volts. * Propagation Delay, 1.5 ns Typical * Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range) * Voltage Compensated * MECL 10K - Compatible LOGIC DIAGRAM 5 6 7 4 2 3 1 10 12 15 11 13 14 GND VCC (+5.0 VDC) VEE (-5.2 VDC) = PIN 16 = PIN 9 = PIN 8 PLCC-20 FN SUFFIX CASE 775 10H424 AWLYYWW PDIP-16 P SUFFIX CASE 648 1 1 http://onsemi.com MARKING DIAGRAMS 16 CDIP-16 L SUFFIX CASE 620 1 16 MC10H424P AWLYYWW MC10H424L AWLYYWW DIP PIN ASSIGNMENT BOUT AOUT BOUT AOUT AIN COMMON STROBE BIN VEE 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 GND COUT DOUT DOUT COUT DIN CIN VCC A WL YY WW = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device MC10H424L MC10H424P MC10H424FN Package CDIP-16 PDIP-16 PLCC-20 Shipping 25 Units/Rail 25 Units/Rail 46 Units/Rail Pin assignment is for Dual-in-Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 18 of the ON Semiconductor MECL Data Book (DL122/D). (c) Semiconductor Components Industries, LLC, 2000 1 March, 2000 - Rev. 6 Publication Order Number: MC10H424/D MC10H424 MAXIMUM RATINGS Symbol VEE VCC VI VI Iout TA Tstg Power Supply (VCC = 5.0 V) Power Supply (VEE = - 5.2 V) Input Voltage (ECL) Input Voltage (TTL) Output Current - Continuous - Surge Operating Temperature Range Storage Temperature Range - Plastic - Ceramic Characteristic Rating -8.0 to 0 0 to +7.0 0 to VEE 0 to VCC 50 100 0 to +75 -55 to +150 -55 to +165 Unit Vdc Vdc Vdc Vdc mA C C ELECTRICAL CHARACTERISTICS (VEE = -5.2 V 5%, VCC = 5.0 V 5.0%) 0 Symbol IE ICCH ICCL IR IF IinH IinL V(BR)in VI VOH VOL VIH VIL VIH VIL Characteristic Negative Power Supply Drain Current Positive Power Supply Drain Current Reverse Current Pin 5,7,10,11 Forward Current Pin 5,7,10,11 Input HIGH Current Pin 6 Input LOW Current Pin 6 Input Breakdown Voltage Input Clamp Voltage High Output Voltage Low Output Voltage High Input Voltage Pin 5,7,10,11 Low Input Voltage Pin 5,7,10,11 High Input Voltage Pin 6 Low Input Voltage Pin 6 Min - - - - - - 0.5 5.5 - -1.02 -1.95 2.0 - -1.17 -1.95 Max 72 16 25 50 -3.2 450 - - -1.5 -0.84 -1.63 - 0.8 -0.84 -1.48 Min - - - - - - 0.5 5.5 - -0.98 -1.95 2.0 - -1.13 -1.95 25 Max 66 16 25 50 -3.2 310 - - -1.5 -0.81 -1.63 - 0.8 -0.81 -1.48 Min - - - - - - 0.3 5.5 - -0.92 -1.95 +2.0 - -1.07 -1.95 75 Max 72 18 25 50 -3.2 310 - - -1.5 -0.735 -1.60 - 0.8 -0.735 -1.45 Unit mAdc mAdc mAdc Adc mAdc Adc Adc Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc AC PARAMETERS Propagation Delay Data Strobe Rise Time Fall Time tpd 0.5 0.5 tr tf 0.5 0.5 2.2 2.2 2.0 2.0 0.5 0.5 0.5 0.5 2.3 2.3 2.0 2.0 0.5 0.5 0.5 0.5 2.4 2.4 2.2 2.2 ns ns ns NOTE: Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 Ifpm is maintained. Outputs are terminated through a 50-ohm resistor to -2.1 volts. APPLICATIONS INFORMATION The MC10H424 has TTL-compatible inputs, an ECL strobe and MECL complementary open-emitter outputs that allow use as an inverting/non-inverting translator or as a differential line driver. When the common strobe input is at the low-logic level, it forces all true outputs to a MECL low-logic state and all inverting outputs to a MECL high-logic state. An advantage of this device is that TTL-level information can be transmitted differentially, via balanced twisted pair lines, to MECL equipment, where the signal can be received by the MC10H115 or MC10H116 differential line receivers. http://onsemi.com 2 MC10H424 PACKAGE DIMENSIONS PLCC-20 FN SUFFIX PLASTIC PLCC PACKAGE CASE 775-02 ISSUE C B -N- Y BRK D -L- -M- W D X V A Z R 0.007 (0.180) M T L-M S 0.007 (0.180) M T L-M U S N S S 0.007 (0.180) M T L-M N S Z 20 1 G1 0.010 (0.250) S T L-M S N S VIEW D-D 0.007 (0.180) M T L-M S N N S H 0.007 (0.180) M T L-M S N S S K1 K C E 0.004 (0.100) G G1 0.010 (0.250) S T L-M J -T- SEATING PLANE F VIEW S NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). 0.007 (0.180) M T L-M S N S VIEW S S N S DIM A B C E F G H J K R U V W X Y Z G1 K1 INCHES MIN MAX 0.385 0.395 0.385 0.395 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --- 0.025 --- 0.350 0.356 0.350 0.356 0.042 0.048 0.042 0.048 0.042 0.056 --- 0.020 2_ 10 _ 0.310 0.330 0.040 --- MILLIMETERS MIN MAX 9.78 10.03 9.78 10.03 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --- 0.64 --- 8.89 9.04 8.89 9.04 1.07 1.21 1.07 1.21 1.07 1.42 --- 0.50 2_ 10 _ 7.88 8.38 1.02 --- http://onsemi.com 3 MC10H424 CDIP-16 L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE T -A- 16 9 -B- 1 8 C L NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. DIM A B C D E F G H K L M N INCHES MIN MAX 0.750 0.785 0.240 0.295 --- 0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --- 5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01 -T- SEATING PLANE N E F D G 16 PL K M J 16 PL 0.25 (0.010) M M TB S 0.25 (0.010) TA S -A- 16 9 PDIP-16 P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R B 1 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01 F S C L -T- H G D 16 PL SEATING PLANE K J TA M M 0.25 (0.010) M ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MC10H424/D |
Price & Availability of MC10H424FN
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |