 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1N6510 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION DESCRIPTION These low capacitance diode arrays are multiple, discrete, isolated junctions fabricated by a planar process and mounted in a 16-PIN ceramic flat pack for use as steering diodes protecting up to eight I/O ports from ESD, EFT, or surge by directing them either to the positive side of the power supply line or to ground (see figure 1). An external TVS diode may be added between the positive supply line and ground to prevent over-voltage on the supply rail. They may also be used in fast switching coredriver applications. This includes computers and peripheral equipment such as magnetic cores, thin-film memories, plated-wire memories, etc., as well as decoding or encoding applications. These arrays offer many advantages of integrated circuits such as high-density packaging and improved reliability. This is a result of fewer pick and place operations, smaller footprint, smaller weight, and elimination of various discrete packages that may not be as user friendly in PC board mounting. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com APPEARANCE WWW . Microsemi .C OM 16-PIN Ceramic Flat Pack FEATURES * * * * * * * Hermetic Ceramic Package Isolated Diodes to Eliminate Cross-Talk Voltages High Breakdown Voltage VBR > 75 V at 5 A Low Leakage IR< 100nA at 40 V Low Capacitance Ct < 4.0 pF Switching Speeds less than 10 ns Options for screening in accordance with MIL-PRF19500/474 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. For example, designate MX1N6510 for a JANTX screen. * * * * * * * APPLICATIONS / BENEFITS High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet: 10 Base T Computer I/O Ports LAN Switching Core Drivers IEC 61000-4 Compatible (See Circuit in Figure 1) 61000-4-2 (ESD): Air 15 kV, contact - 8 kV 61000-4-4 (EFT): 40 A - 5/50 ns 61000-4-5 (surge): 12 A, 8/20 s MAXIMUM RATINGS * * * * * * * Reverse Breakdown Voltage of 75 Vdc (Note 1 & 2) Continuous Forward Current of 300 mA dc (Note 1 & 3) Peak Surge Current (tp=1/120 s) of 500 mA dc (Note 1) 400 mW Power Dissipation per Junction @ 25oC 500 mW Power Dissipation per Package @ 25oC (Note 4) Operating Junction Temperature range -65 to +150oC Storage Temperature range of -65 to +200oC NOTE 1: NOTE 2: NOTE 3: NOTE 4: Each Diode Pulsed: PW = 100 ms max.; duty cycle <20% o o Derate at 2.4 mA/ C above +25 C o o Derate at 4.0 mW/ C above +25 C MECHANICAL AND PACKAGING * * * * 16-PIN Ceramic Flat Pack Weight 0.5 grams (approximate) Marking: Logo, part number, date code and dot identifying pin #1 Carrier Tubes; 19 pcs (standard) ELECTRICAL CHARACTERISTICS (Per Diode) @ 25oC unless otherwise specified MAXIMUM FORWARD VOLTAGE VF1 IF = 100 mA (Note 1) V MAXIMUM REVERSE CURRENT MAXIMUM REVERSE CURRENT MAXIMUM CAPACITANCE (PIN TO PIN) MAXIMUM FORWARD RECOVERY TIME tfr IF = 100 mA ns MAXIMUM REVERSE RECOVERY TIME trr @ IF = IR = 10 mA irr = 1 mA RL = 100 ohms ns MAXIMUM FORWARD VOLTAGE MATCH VF5 IF= 10 mA mV 1N6510 Ct IR1 VR = 40 V A IR2 VR = 20 V nA VR = 0 V; F = 1 MHz pF PART NUMBER 1N6510 Copyright 2003 5-03-2004 REV A 1 0.1 25 4.0 15 10 5 Page 1 NOTE 1: Pulsed: PW = 300 s +/- 50 s, duty cycle <2%, 90 s after leading edge. Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 1N6510 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION SYMBOLS & DEFINITIONS Symbol VBR VF IR Ct DEFINITION Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. Capacitance: The capacitance of the TVS as defined @ 0 volts at a frequency of 1 MHz and stated in picofarads. WWW . Microsemi .C OM SCHEMATIC PACKAGE DIMENSIONS SCHEMATIC Supply rail (+VCC) I/O Port GND (or -VCC) Steering Diode Application 1N6510 6510 FIGURE 1 Copyright 2003 5-03-2004 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 |
Price & Availability of 1N6510
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
