View LM4862L-D08-T_463121.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UNISONIC TECHNOLOGIES CO., LTD LM4862
Preliminary CMOS IC
AUDIO POWER AMPLIFIER WITH SHUTDOWN MODE
DESCRIPTION
The UTC LM4862 is a built in bridge-connected form audio amplifier. In normal operation, it can deliver 500 mW (typ.) continuous power. The output load of the UTC LM4862 should be 8, the supply voltage should be 5V, and the THD is as low as 1%. As the most popular amplifiers, LM4862 is also designed to be able to provide high quality output power with less external components, such as the output capacitors for coupling, bootstrap capacitors, or snobbery networks. In applications, the UTC LM4862 can be specially used as an ideal in low-power portable systems, for example, portable computers, desktop computers, and low voltage audio systems, etc. DIP-8
SOP-8
FEATURES
* Stable Unity Gain * Gain Configuration can be set by External Components
ORDERING INFORMATION
Ordering Number Lead Free Halogen Free LM4862L-D08-T LM4862G-D08-T LM4862L-S08-R LM4862G-S08-R Package DIP-8 SOP-8 Packing Tube Tape Reel
www.unisonic.com.tw Copyright (c) 2010 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-314.b
LM4862
PIN CONFIGURATION
Preliminary
CMOS IC
SHUTDOWN
1
8
VO2
BYPASS
2
7
GND
IN+
3
6
VDD
IN-
4
5
VO1
PIN DESCRIPTION
PIN NO 1 2 3 4 5 6 7 8 PIN NAME SHUTDOWN BYPASS IN+ INVO1 VDD GND VO2 DESCRIPTION Shutdown mode control input, high active Connect to internal voltage divider for middle supply bias Non-inverting power input pin Inverting power input pin Output power pin 1 Power supply Ground Output power pin 2
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R502-314.b
LM4862
BLOCK DIAGRAM
Preliminary
CMOS IC
VDD + RF 20k 6 100k 4 -IN Ri 20k Ci 0.39F Audio Input CB 1.0F 3 +IN + VDD /2 40k + 2 Bypass 5 VO1 AV=-1 RL 8 CS 1.0F
40k VO2 8
Bias VDD RPU 1 Shutdown NC
100k
7 GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R502-314.b
LM4862
PARAMETER Supply Voltage Input Voltage
Preliminary
SYMBOL VDD VIN
CMOS IC
ABSOLUTE MAXIMUM RATING (Ta=25 unless otherwise specified.)
RATINGS UNIT 6.0 V -0.3 ~ +(0.3+VDD) V DIP-8 500 mW Power Dissipation PD SOP-8 300 mW Infrared (15 sec.) 220 Junction Temperature TJ +150 Storage Temperature TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS (VCC=5V, f=1kHz, Ta=25 unless otherwise specified.)
PARAMETER Supply Voltage Output Offset Voltage Quiescent Power Supply Current Shutdown Current Output Power Total Harmonic Distortion Power Supply Rejection Ratio SYMBOL TEST CONDITIONS VDD VOS VIN=0V IDD VIN=0V, IO=0A ISD VPIN1=VDD THD=1%, f=1kHz, RL=8 PO THD=10%, f=1kHz, RL=8 THD f=1kHz, RL=8, Po = 500mW PSRR VCC=4.9V ~ 5.1V MIN 2.0 TYP MAX UNIT 5.5 V 5.0 50 mV 6.5 12.0 mA 0.6 A 500 mW 800 mW 0.5 % 60 dB
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R502-314.b
LM4862
Preliminary
CMOS IC
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-314.b

▲Up To Search▲

Price & Availability of LM4862L-D08-T

	To Download LM4862L-D08-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .