www.rfm.com e-mail: info@rfm.com page 1 of 1 ?2008 by rf monolithics, inc. BM242 - 5/6/08 a 5/8 inch feed through is used to secure the antenna to a mounting surface. access to the underside of the surface is required for installation. the antenna is outfitted with one foot of lmr-200 cable and a tnc female connector. antenna gain is 2.5 dbi, with no ground plane required for proper operation. the antenna can be mounted on fiberglass or plastic and meet all specifications. the antenna radome consists of uv-resistant black abs plastic, with a chrome-plated mounting plate and threaded feed thru. the bottom mounting plate is outfitted with an ?o? ring for complete sealing. a lock nut washer is supplied for securing the antenna mounting. specifications frequency range 2400 - 2485 mhz gain 2.5 dbi maximum vswr 2:1 over the operating frequency range nominal impedance 50 ohms maximum power 10 watts operating temperature -40 c to +85c radome/mount 1.75 in diameter x 3 in height case material uv-resistant abs plastic mounting 5/8 in diameter feed thru, 1/2 in long thread hardware nut, lock washer & gasket included pigtail cable 1 ft lmr-200, exits at bottom pigtail connector tnc female jumper cable male tnc with lmr-195 cable omni directional antenna BM242 magnitude in db versus azimuth magnitude in db versus elevation
|
