www.sunled.com published date : feb 26,2008 drawing no : sdsa3680 v5 checked : b.l .liu p.1/4 part number: ZMO46W-8 subminiature solid state lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZMO46W-8 orange ingaalp water clear 1200 1990 610 20 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. features z subminiature package. z wide viewing angle. z yoke lead. z long life-solid state reliability. z low package profile. z package : 1000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. operating characteristics (t a =25c ) mo (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.0 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 610 nm wavelength of dominant emission (typ.) (i f =20ma) d 601 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 29 nm capacitance (typ.) (vf=0v, f=1mhz) c 30 pf absolute maximum ratings (t a =25c ) mo (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 195 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85
www.sunled.com published date : feb 26,2008 drawing no : sdsa3680 v5 checked : b.l .liu p.2/4 part number: ZMO46W-8 subminiature solid state lamp ? mo
www.sunled.com published date : feb 26,2008 drawing no : sdsa3680 v5 checked : b.l .liu p.3/4 part number: ZMO46W-8 subminiature solid state lamp remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? tape specification (units : mm) ? recommended soldering pattern (units : mm;tolerance: 0.1) the device has a single mounting surface. the device must be mounted according to the specifications.
www.sunled.com published date : feb 26,2008 drawing no : sdsa3680 v5 checked : b.l .liu p.4/4 part number: ZMO46W-8 subminiature solid state lamp packing & label specifications ZMO46W-8
|
