FTD1015 no.7001-1/4 features ? low on-resistance. ? 4v drive. ? mounting height 1.1mm. ? composite type, facilitating high-density mounting. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7001 FTD1015 package dimensions unit : mm 2155a [FTD1015] 71001 ts im ta-2943 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. p-channel silicon mosfet load switching applications 1 : drain1 2 : source1 3 : source1 4 : gate1 5 : gate2 6 : source2 7 : source2 8 : drain2 sanyo : tssop8 6.4 3.0 0.425 0.65 4.5 0.95 (0.95) 0.5 0.125 85 14 0.25 1.0 0.1 specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss --30 v gate-to-source voltage v gss 20 v drain current (dc) i d -- 3 a drain current (pulse) i dp pw 10 m s, duty cycle 1% --15 a allowable power dissipation p d mounted on a ceramic board (1000mm 2 5 0.8mm) 1unit 0.8 w total dissipation p t mounted on a ceramic board (1000mm 2 5 0.8mm) 1.0 w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =--1ma, v gs =0 --30 v zero-gate voltage drain current i dss v ds =--30v, v gs =0 --1 m a gate-to-source leakage current i gss v gs = 16v, v ds =0 10 m a cutoff voltage v gs (off) v ds =--10v, i d =--1ma --1.0 --2.4 v forward transfer admittance ? yfs ? v ds =--10v, i d =--3a 3.5 5 s marking : d1015 continued on next page.
FTD1015 no.7001-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit r ds (on) 1 i d =--3a, v gs =--10v 64 84 m w static drain-to-source on-state resistance r ds (on) 2 i d =--2a, v gs =--4.5v 94 132 m w r ds (on) 3 i d =--2a, v gs =--4v 104 146 m w input capacitance ciss v ds =--10v, f=1mhz 560 pf output capacitance coss v ds =--10v, f=1mhz 150 pf reverse transfer capacitance crss v ds =--10v, f=1mhz 95 pf turn-on delay time t d (on) see specified test circuit 9 ns rise time t r see specified test circuit 6 ns turn-off delay time t d (off) see specified test circuit 60 ns fall time t f see specified test circuit 57 ns total gate charge qg v ds =--10v, v gs =--10v, i d =--3a 12 nc gate-to-source charge qgs v ds =--10v, v gs =--10v, i d =--3a 2 nc gate-to-drain miller charge qgd v ds =--10v, v gs =--10v, i d =--3a 2 nc diode forward voltage v sd i s =--3a, v gs =0 --0.82 --1.5 v switching time test circuit electrical connection pw=10 s d.c. 1% 0v --10v v in p. g 50 g s i d = --3a r l =5 v dd = --15v v out FTD1015 v in d i d -- v ds drain-to-source voltage, v ds -- v drain current, i d -- a i d -- v gs gate-to-source voltage, v gs -- v r ds (on) -- v gs static drain-to-source on-state resistance, r ds (on) -- m static drain-to-source on-state resistance, r ds (on) -- m ambient temperature, ta -- c drain current, i d -- a gate-to-source voltage, v gs -- v r ds (on) -- ta 0 50 100 150 200 0 --0.2 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 --0.4 --0.6 --0.8 --1.0 --0.1 --0.3 --0.5 --0.7 --0.9 v gs = --2.0v --4.5v it02844 0 --2 --4 --6 --8 --10 --12 --14 --16 --18 --20 ta=25 c it02846 it02847 --60 0 50 100 150 200 --40 --20 0 20 40 60 80 100 120 160 140 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 9 -- 8 v ds = --10v ta=75 c it02845 --3.0a i d = --2.0a i d = --2.0a, v gs = --4.0v --4.0v --3.5v --3.0v --2.5v --6.0v --10.0v --25 c 25 c i d = --2.0a, v gs = --4.5v i d = --3.0a, v gs = --10.0v ta= --25 c 25 c 75 c d1 s1 s1 g1 d2 s2 s2 g2
FTD1015 no.7001-3/4 2 10 7 5 3 100 7 5 3 2 1000 7 5 3 2 --0.1 --1.0 7 5 3 2 --0.01 7 5 3 2 7 5 3 2 --10 7 5 3 2 --0.1 --0.01 --1.0 2 357 23 57 23 57 --10 0 --5 --10 --15 --20 0 -- 2 -- 4 -- 6 -- 8 02468101214 --12 --10 v ds = --10v i d = --3.0a it02852 0 0 20 40 0.5 1.0 0.8 1.5 60 80 100 120 140 160 it03262 it03261 10 100 1000 7 5 3 2 7 5 3 2 f=1mhz ciss coss crss it02851 --0.1 1.0 --1.0 23 57 23 57 --10 v dd = --15v v gs = --10v t d (on) t d (off) t r t f it02850 it02848 it02849 0 --0.4 --0.2 --0.6 --0.8 --1.2 --1.0 --0.001 v gs =0 --25 c 25 c ta=75 c 100 7 5 3 2 1.0 7 5 3 2 7 5 3 2 10 0.1 v ds = --10v ta= --25 c 75 c 25 c mounted on a ceramic board(1000mm 2 5 0.8mm) total dissipation 1unit v gs -- qg p d -- ta gate-to-source voltage, v gs -- v a s o drain-to-source voltage, v ds -- v drain current, i d -- a drain-to-source voltage, v ds -- v ciss, coss, crss -- v ds ciss, coss, crss -- pf drain current, i d -- a sw time -- i d switching time, sw time -- ns drain current, i d -- a forward transfer admittance, ? yfs ? -- s ? yfs ? -- i d diode forward voltage, v sd -- v forward current, i f -- a i f -- v sd ambient temperature, ta -- c allowable power dissipation, p d -- w total gate charge, qg -- nc 23 57 23 57 23 57 --0.1 --1.0 23 57 --0.01 --10 --100 i dp = --15a 2 2 3 5 7 2 3 5 7 3 5 7 --10 --1.0 2 3 --0.1 --0.01 100 s i d = --3a 100ms dc operation 1ms 10ms <10 s operation in this area is limited by r ds (on). ta=25 c single pulse mounted on a ceramic board(1000mm 2 5 0.8mm)1unit
FTD1015 no.7001-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of july, 2001. specifications and information herein are subject to change without notice. ps
|
