for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 1 HMC213AMS8 / 213ams8e gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz v02.1210 general description features functional diagram ultra s mall package: m s op8 conversion loss: 8.5 db lo / r f i solation: 40 db e lectrical specifcations, t a = +25 c, as a function of lo drive typical applications the hmc213am s 8( e ) is ideal for: ? base s tations ? pcmc i a transceivers ? wireless local loop the hmc213am s 8( e ) is a ultra miniature double- balanced mixer in 8 lead plastic surface mount package (m s op). this passive mm i c mixer is constructed of gaas s chottky diodes and novel planar transformer baluns on the chip. the device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. the consistent mm i c performance will improve system operation and assure regulatory compliance. parameter lo = +13 dbm i f = 100 mhz lo = +10 dbm i f = 100 mhz units min. typ. max. min. typ. max. frequency r ange, r f & lo 1.5 - 4.5 1.7 - 3.6 ghz frequency r ange, i f dc - 1.5 dc - 1.5 ghz conversion loss 8.5 10 9 10.5 db noise figure ( ss b) 8.5 10 9 10.5 db lo to r f i solation 29 40 32 40 db lo to i f i solation 27 35 26 35 db i p3 ( i nput) 16 19 14 18 dbm 1 db gain compression ( i nput) 7 10 5 8 dbm
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 2 conversion gain vs. temperature @ lo = +13 d bm isolation @ lo = +13 dbm conversion gain vs. lo drive r eturn loss @ lo = +13 dbm if b andwidth @ lo = +13 dbm p1db vs. temperature @ lo = +13 dbm -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 4.5 5 +9 dbm +11 dbm +15 dbm conversion gain (db) frequency (ghz) -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 rf if lo return loss (db) frequency (ghz) -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 4.5 5 -40 c +25 c +85 c conversion gain (db) frequency (ghz) -60 -50 -40 -30 -20 -10 0 1 1.5 2 2.5 3 3.5 4 4.5 5 rf/if lo/if lo/rf isolation (db) frequency (ghz) -20 -15 -10 -5 0 0 0.5 1 1.5 2 lo=1.8 ghz, rf=1.9 to 4.9 ghz lo=4.4 ghz, rf=1.3 to 4.3 ghz conversion gain (db) frequency (ghz) 8 9 10 11 12 13 14 15 16 1.5 2 2.5 3 3.5 4 4.5 5 -40 c +25 c +85 c p1db (dbm) frequency (ghz) HMC213AMS8 / 213ams8e v02.1210 gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 3 input ip3 vs. temperature @ lo = +13 d b m input ip2 vs. temperature @ lo = +13 d b m input ip3 vs. lo drive input ip2 vs. lo drive 40 44 48 52 56 60 64 1.5 2 2.5 3 3.5 4 4.5 5 -40c +85c +25c input ip2 (dbm) lo frequency (ghz) 40 44 48 52 56 60 64 1.5 2 2.5 3 3.5 4 4.5 5 +11 dbm +15 dbm +13 dbm input ip2 (dbm) lo frequency (ghz) 10 15 20 25 1.5 2 2.5 3 3.5 4 4.5 5 -40c +85c +25c input ip3 (dbm) lo frequency (ghz) 10 15 20 25 1.5 2 2.5 3 3.5 4 4.5 5 +11 dbm +15 dbm +13 dbm input ip3 (dbm) lo frequency (ghz) HMC213AMS8 / 213ams8e v02.1210 gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 4 absolute maximum r atings rf / if input +13 dbm lo drive +27 dbm continuous pdiss (t = 85 c) (derate 10.6 mw/c above 85 c) 0.69 w thermal r esistance (channel to package lead) 93.7 c/w junction temperature 150 c s torage temperature -65 to +150 c operating temperature -40 to +85 c e l e ct ro s tat ic se n si t i v e de v ic e ob ser v e handl i ng p re caut i on s mxn spurious outputs harmonics of lo @ r f port nlo m r f 0 1 2 3 4 0 xx 12.7 20.8 19.8 76.2 1 13.4 0 39.8 38.9 56.2 2 73.8 78.2 66.5 82.2 68.8 3 93.8 89.2 92.2 82.4 89.0 4 >105 >105 >105 >105 >105 r f = 3.5 ghz @ -10 dbm lo = 3.6 ghz @ +13 dbm all values in dbc below i f power level (-1 r f + 1lo) lo freq. (ghz) nlo s pur 1 2 3 4 1.5 40 30 62 57 2.0 38 25 55 58 2.5 41 28 34 61 3.0 41 35 36 61 3.5 38 45 52 62 4.0 35 47 55 62 4.5 33 50 65 73 5.0 32 52 68 82 lo = +13 dbm values in dbc below input lo level measured at r f port. HMC213AMS8 / 213ams8e v02.1210 gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 5 o utline drawing part number package body material lead finish m s l r ating package marking [3] hmc213am s 8 low s tress i njection molded plastic s n/pb s older m s l1 [1] 213a xxxx hmc213am s 8 e r oh s -compliant low s tress i njection molded plastic 100% matte s n m s l1 [2] 213a xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information not es: 1. leadframe materi al: copper alloy 2. dimensions are in inches [millimet ers]. 3. dimension does not include moldfla s h of 0.15mm per side. 4. dimension does not include moldfla sh of 0.25mm per side. 5. all gr ound leads mus t be soldere d to pcb rf gr ound. HMC213AMS8 / 213ams8e v02.1210 gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 6 e valuation pc b l ist of materials for e valuation pc b 103350 [1] i tem description j1 - j3 pcb mount s ma r f connector u1 hmc213am s 8( e ) mixer pcb [2] 101650 e valuation board [1] r eference this number when ordering complete evaluation pcb [2] circuit board material: r ogers 4350 the circuit board used in the application should use r f circuit design techniques. s ignal lines sho- uld have 50 ohm impedance while the package ground leads and exposed paddle should be con - nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. HMC213AMS8 / 213ams8e v02.1210 gaas mmic smt double- ba l a n c e d m i xer, 1.5 - 4.5 ghz
|