MCH6534 no.7643-1/4 applications ? low-frequency power amplifier, high-speed switching motor drivers, muting. features ? composite type with 2 npn transistors contained in a single package, facilitating high-density mounting. ? ultrasmall package permitting applied sets to be small and slim. ? small on-resistance (ron). specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 20 v collector-to-emitter voltage v ceo 15 v emitter-to-base voltage v ebo 5v collector current i c 700 ma collector current (pulse) i cp 1.4 a collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8m) 0.5 w total power dissipation p t mounted on a ceramic board (600mm 2 5 0.8m) 0.55 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =15v, i e =0 100 na emitter cutoff current i ebo v eb =4v, i c =0 100 na dc current gain h fe v ce =2v, i c =10ma 300 800 gain-bandwidth product f t v ce =2v, i c =50ma 330 mhz output capacitance cob v cb =10v, f=1mhz 3.2 pf collector-to-emitter saturation voltage v ce (sat) i c =200ma, i b =10ma 150 300 mv base-to-emitter saturation voltage v be (sat) i c =200ma, i b =10ma 0.9 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 m a, i e =0 20 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 15 v emitter-to-base breakdown voltage v (br)ebo i e =10 m a, i c =0 5 v marking : eg continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7643 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 42004ea ts im ta-100671 MCH6534 npn epitaxial planar silicon transistor switching, driver applications
MCH6534 no.7643-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit turm-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. 77 ns fall time t f see specified test circuit. 40 ns package dimensions electrical connection unit : mm 2224 switching time test circuit 5 6 1 4 23 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 top view v r r b v cc =5v v be = --5v ++ 50 w input output r l 220 m f 470 m f pw=20 m s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =500ma 100 200 300 400 600 500 700 800 0 0.2 0.4 0.6 0.8 1.0 1.2 0 0 0.4 0.8 1.2 1.6 0.2 0.6 1.0 1.4 1.8 2.0 it05490 it05491 0 40 80 120 160 200 20 60 100 140 180 i b =0 0.1ma 0.2ma 0.3ma 0.4ma 0.5ma 0.6ma 0.7ma 0.8ma 1.0ma 0.9ma v ce =2v ta=75 c 25 c --25 c i c -- v ce i c -- v be collector-to-emitter voltage, v ce -- v collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 sanyo : mcph6 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 1 123 654 32 5 46 (bottom view) (top view)
MCH6534 no.7643-3/4 1.0 23 57 10 23 57 100 23 57 1000 5 7 100 2 3 5 7 it05496 v ce =2v 1.0 23 57 10 23 57 100 23 57 1000 100 2 3 5 7 1000 2 3 5 7 10000 it05495 ta= --25 c 75 c 25 c i c / i b =20 f t -- i c collector current, i c -- ma gain-bandwidth product, f t -- mhz v be (sat) -- i c collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- mv 1.0 23 57 10 23 57 100 23 57 1000 10 2 3 5 7 100 2 3 5 7 1000 it05494 i c / i b =50 ta=75 c --25 c 25 c 0.1 23 57 1.0 23 57 10 23 1.0 2 3 5 7 10 it05497 f=1mhz cob -- v cb v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma output capacitance, cob -- pf collector-to-base voltage, v cb -- v f=1mhz 0.1 0.1 it06067 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 1.0 10 out in 1k w 1k w i b ron -- i b base current, i b -- ma on-resistance, ron -- w 0 0 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- w it06387 0.7 0.6 0.5 0.55 0.4 0.3 0.2 0.1 40 20 100 120 60 80 140 160 total dissipation 1unit mounted on a ceramic board (600mm 2 5 0.8mm) 1.0 23 57 10 23 57 100 23 57 1000 10 2 3 5 7 100 2 3 5 7 1000 3 5 7 100 2 3 5 7 1000 1.0 23 57 10 23 57 100 23 57 1000 it05492 it05493 v ce =2v i c / i b =20 ta=75 c --25 c 25 c ta=75 c --25 c 25 c h fe -- i c v ce (sat) -- i c collector current, i c -- ma dc current gain, h fe collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv
MCH6534 no.7643-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of april, 2004. specifications and information herein are subject to change without notice. ps
|
