thick film resistor array www.vishay.com for technical questions, contact: ff3fresis tors@vishay.com document number: 31002 252 revision: 18-jan-07 cra06e & s vishay cra06e and cra06s thick film resistor arrays are constructed on a high grade ceramic body with convex terminations. a small package enables the design of high density circuits. the single component reduces board space, component counts and assembly costs. features ? convex terminal array available with either scalloped corners (e version) or square corners (s version) ? wide ohmic range: 10r to 1m0 ? 4 or 8 terminal package with isolated resistors ? lead (pb)-free solder contacts on ni barrier layer ? pure tin plating provides co mpatibility with lead (pb)-free and lead containing soldering processes ? compatible with "restriction of the use of hazardous substances" (rohs) directive 2002/95/ec (issue 2004) notes 1. rated voltage: 2. the power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow supp ort of the printed-circuit board (thermal re sistance). the rates dissipation applies only if the permitted film temperature of 155 c is n ot exceed. notes 1. preferred way for ordering products is by use of the part number 2. please refer to table packaging, see next page standard electrical specifications model circuit power rating p 70 c w limiting element voltage max. v ? temperature coefficient ppm/k tolerance % resistance range e-series cra06e cra06s 03 0.063 50 100 1 10r - 1m0 24 + 96 200 2; 5 24 zero-ohm-resistor available; r max = 50 m , i max = 1 a technical specifications parameter unit cra06e & s rated dissipation at 70 c 2) w per element 0.063 limiting element voltage 1) v ? 50 insulation voltage (1 min) v dc/ac peak 100 category temperature range c - 55/+ 125 (+ 155) insulation resistance > 10 9 pr tolera n ce f = 1 % g = 2 % j = 5 % z = 0 j u mper mode l cra06 termi n al style s e special u p to 2 digits pi n 04 08 part number and product description part number: cra06s08347k0jta 1) cr a0 6 s 08 347k0jta product description: cra06s 08 03 473 j rt1 e3 08 termi n al cou n t 04 0 8 j tolera n ce f = 1 % g = 2 % j = 5 % z = 0 j u mper circui t 3 = 03 cra06s model cra06s cra06e 03 circuit type 03 473 resista n ce v alue 473 = 47 k 4702 = 47 k 10r0 = 10 100 = 10 000 = 0 j u mper v alu e r = decimal k = tho u sand m = millio n 0000 = 0 j u mpe r e3 lead (p b )-free e3 = p u re tin termination finish rt1 rt1 rt6 first t w o digits (3 for 1 %) are significant. last digit is the m u ltiplier. packagi n g 2) packagi n g 2) ta tc
document number: 31002 for technical questions, contact: ff3fresistors@vishay.com www.vishay.com revision: 18-jan-07 253 cra06e & s thick film resistor array vishay circuit dimensions available types and ranges model terminal count circuit temperature coefficient tolerance cra06s 04 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 % 08 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 % cra06e 08 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 % packaging model tape width diameter pitch pieces/reel packaging code pa pe r ta p e part number product description cra06 8 mm 180 mm/7" 4 mm 5000 ta rt1 330 mm/13" 4 mm 20 000 tc rt6 derating 120 100 8 0 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 ambient temperature c 70 rated power % 03 circuit 4 pin 8 pin e- v ersion 103 s- v ersion 1 pin 1 e e a a 103 model pin no# dimensions [in millimeters] laa 1 bb*p t w cra06s 4 1.6 0.38 0.61 0.3 0.3 0.8 0.5 1.5 cra06e 8 3.2 0.38 - 0.3 0.3 0.8 0.5 1.5 cra06s 8 3.2 0.38 0.61 0.3 0.3 0.8 0.5 1.5 tol 0.15 0.15 0.15 0.15 0.15 0.1 0.1 0.15 solder pad dimensions [in millimeters] model pinscwdpabe cra06s 4 0.8 3.1 0.36 0.44 1.15 cra06e cra06s 8 0.8 3.1 0.36 0.8 0.44 1.15 0.63
www.vishay.com for technical questions, contact: ff3fresis tors@vishay.com document number: 31002 254 revision: 18-jan-07 cra06e & s vishay thick film resistor array notes 1. figures are given for a single element. 2. solderability is specified for 2 y ears after production or requalification. permitted storage time is 20 years. test procedures and requirements en 60115-1 test (clause) conditions of test requirements permissible change ( r / r ) 1) stability class 1 or better stability class 2 or better stability for product types: 10 to 1 m 10 to 1 m cra06e/cra06s resistance (4.5) - 1 % 2 % ; 5 % temperature coefficient (4.8.4.2) 20/- 55/20 c and 20/125/20 c 100 ppm/k 200 ppm/k overload (4.13) u = 2.5 ( p 70 x r ) 1/2 2 x u max ; 0.5 s (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) solderability (4.17.5) 2) aging 4 h at 155 c, dryheat solder bath method; 235 c; 2 s visual examination good tinning ( 95 % covered) no visible damage resistance to soldering heat (4.18.2) solder bath method; (260 5) c; (10 1) s (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) rapid change of temperature (4.19) 30 min. at lct = - 55 c; 30 min. at uct = 125 c; 5 cycles (0.25 % r + 0.05 ) (0.5 % r + 0.05 ) damp heat, steady state (4.24) (40 2) c; 56 days; (93 3) % rh (1 % r + 0.05 ) (2 % r + 0.1 ) climatic sequence (4.23) 16 h at uct = 125 c; 1 cycle at 55 c; 2 h at lct = - 55 c; 1 h/1 kpa at 15 c to 35 c; 5 cycles at 55 c u = ( p 70 x r ) 1/2 u = u max ; whichever is less severe (1 % r + 0.05 ) (2 % r + 0.1 ) endurance at 70 c (4.25.1) u = ( p 70 x r ) 1/2 u = u max ; whichever is less severe 1.5 h on; 0.5 h off; 70 c; 1000 h (1 % r + 0.05 ) (2 % r + 0.1 ) extended endurance (4.25.1.8) duration extended to 8000 hours (2 % r + 0.1 ) (4 % r + 0.1 ) endurance at upper category temperature (4.25.3) uct = 125 c; 1000 h (1 % r + 0.05 ) (2 % r + 0.1 ) applicable specifications ? en 60115-1 generic specification ? en 140400 sectional specification ? en 140401-802 detail specification ? iec 60068-2-x variety of environmental test procedures ? eia 481 packaging of smd components
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
