fp-3 series 1.27mm spacing fpc connector n features 1. fp-3 series connectors feature a dual contact structure and ensure high reliability. 2. the terminal is fixed to the connector by kink processing to prevent the connector from protruding from the pc board. 3. the connector is finished with special treatment to prevent the flux accumulation. n specification 1. rating : within 10? and 0.5a, 50v ac 2. insulation resistance 1,000m w min. at 500v dc 3. withstanding voltage : 315v ac for one minute 4. contact resistance : 30m w max. (at initial) copper coated fpc (tin-lead plating) 100 w max. (at initial) silver carbon print fpc n material and plating l housing : polybutylene terephthalate (black) 94v-0 l slider : polybutylene terephthalate (black) 94v-0 l contact : phosphor bronze, tin-lead plating n note applicable fpc thickness (silver carbon fpc) 1.27 0.1 1.27 0.1 e a 0.1 a 0.1 (insertion side) (20~36p) 2.54 0.1 (insertion side) (8~18p) 2.54 0.1 n- 0.8 + 0.1 0 n- 0.8 + 0.1 0 9 1 e 0.2 0.8 0.1 1.27 0.05 n 1.27 1 a 0.1 (n+2) 1.27 1 d 0.1 20p~36p (t 0.1~0.3) or c0.2 2-r0.2 0.8 0.1 1.27 0.05 (n 1) 1.27 1 a 0.1 (n 1) 1.27 1 d 0.1 8p~18p (t 0.2~0.3) or c0.2 2-r0.2 1.27 0.2 4 1 9 1 4 1 0 0.8 + 0.1 no. of pins 8~18p 20~36p straight 0.20~0.30mm 0.15~0.25mm right-angle 0.25~0.35mm 0.20~0.30mm l straight type cfp31 -01 l right-angle type cfp33 -01 no. of pins 8 10 12 14 16 18 20 22 24 28 32 36 straight cfp3108?1 cfp3110?1 cfp3112?1 cfp3114?1 cfp3116?1 cfp3118?1 cfp3120?1 cfp3122?1 cfp3124?1 cfp3128?1 cfp3132?1 cfp3136?1 right-angle cfp3308?1 cfp3310?1 cfp3312?1 cfp3314?1 cfp3316?1 cfp3318?1 cfp3320?1 cfp3322?1 cfp3324?1 cfp3328?1 cfp3332?1 cfp3336?1 a 8.89 11.43 13.97 16.51 19.05 21.59 25.40 27.94 30.48 35.56 40.64 45.72 b 11.63 14.17 16.71 19.25 21.79 24.33 28.14 30.68 33.22 38.30 43.38 48.46 c 18.89 21.43 23.97 26.51 29.05 31.59 35.40 37.94 40.48 45.56 50.64 55.72 d 11.43 13.97 16.51 19.05 21.59 24.13 27.94 30.48 33.02 38.10 43.18 48.26 e 7.62 10.16 12.70 12.70 17.78 22.86 key position 14+ 6p 14+ 8p 14+10p 18+10p 18+14p 18+18p n applicable fpc (t = 0.1 to 0.3) n recommended mounting hole for pc board 0.5 only one 8p and 9p at the center key e 5 0.5 b c 1.27 (n 1) 1.27 1 a 12.5 4.0 3.5 1 0.4 2.54 right-angle straight 10 2.54 open lock no.of pins 01 with kink 02 without kink
|
