2SC5960 no.7610-1/4 features ? high breakdown voltage and high reliability. ? high-speed switching. ? wide aso. ? adoption of mbit process. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 500 v collector-to-emitter voltage v ceo 400 v emitter-to-base voltage v ebo 7v collector current i c 7a collector current (pulse) i cp pw 300 m s, duty cycle 10% 14 a base current i b 3a collector dissipation p c 2.5 w tc=25 c60w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =400v, i e =0 10 m a emitter cutoff current i ebo v eb =5v, i c =0 10 m a continued on next page. ordering number : enn7610 2SC5960 switching regulator applications package dimensions unit : mm 2022a [2SC5960] 31504kb ts im ta-100660 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. npn triple diffused planar silicon transistor 1 : base 2 : collector 3 : emitter sanyo : to-3pb 15.6 2.6 3.5 1.2 14.0 1.6 1.0 2.0 0.6 20.0 20.0 15.0 1.3 3.2 4.8 2.0 0.6 5.45 5.45 1.4 1 2 3 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan .com .com .com .com 4 .com u datasheet
2SC5960 no.7610-2/4 6 10 8 4 2 0 02 6 48 13 7 59 10 i c -- v ce it05057 1000ma i b =0 300ma 200ma 100ma 400ma 500ma 600ma 5 9 7 3 1 700ma 800ma 900ma collector-to-emitter voltage, v ce -- v collector current, i c -- a base-to-emitter on-state voltage, v be (on) -- v collector current, i c -- a it05149 8 6 7 4 5 3 2 1 0 0 0.2 0.4 0.6 0.8 1.0 1.4 1.2 i c -- v be (on) v ce =5v ta=120 c 25 c --40 c collector current, i c -- a dc current gain, h fe 10 7 5 100 7 5 3 2 2 3 57 2 3 57 2 3 57 0.1 0.01 1.0 10 h fe -- i c it05151 v ce =5v ta=120 c 25 c --40 c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v 0.1 0.01 1.0 5 3 2 7 5 3 2 7 3 257 3 257 3 257 1.0 0.01 0.1 10 v ce (sat) -- i c it05152 i c / i b =5 ta= --40 c ta=120 c 120 c --40 c 25 c 25 c continued from preceding page. ratings parameter symbol conditions min typ max unit h fe 1v ce =5v, i c =0.8a 20* 50* dc current gain h fe 2v ce =5v, i c =4a 10 h fe 3v ce =5v, i c =1ma 10 collector-to-emitter saturation voltage v ce (sat) i c =4a, i b =0.8a 0.8 v base-to-emitter saturation voltage v be (sat) i c =4a, i b =0.8a 1.5 v gain-bandwidth product f t v ce =10v, i c =0.8a 15 mhz output capacitance cob v cb =10v, f=1mhz 50 pf collector-to-base breakdown voltage v (br)cbo i c =1ma, i e =0 500 v collector-to-emitter breakdown voltage v (br)ceo i c =5ma, r be = 400 v emitter-to-base breakdown voltage v (br)ebo i e =1ma, i c =0 7 v turn-on time t on i c =5a, i b1 =1a, i b2 =--2a, r l =40 w , v cc =200v 0.5 m s storage time t stg i c =5a, i b1 =1a, i b2 =--2a, r l =40 w , v cc =200v 2.5 m s fall time t f i c =5a, i b1 =1a, i b2 =--2a, r l =40 w , v cc =200v 0.3 m s * : the h fe 1 of the 2SC5960 is classified as follows. rank m n h fe 20 to 40 30 to 50 switching time test circuit d.c. 1% v r r b v cc =200v v be = --5v + + 50 input output r l 100 f 470 f pw=20 s i b1 i b2 .com .com .com .com .com 4 .com u datasheet
2SC5960 no.7610-3/4 reverse bias a s o it05863 0.1 5 7 3 2 5 7 3 2 3 2 1.0 10 100 10 57 1.0 23 57 23 1000 57 23 it05063 i cp tc=25 c i b2 = --1.2a const. l=500 h forward bias a s o collector-to-emitter voltage, v ce -- v collector current, i c -- a collector-to-emitter sustain voltage, v cex (sus) -- v collector current, i c -- a it05864 collector current, i c -- a sw time -- i c switching time, sw time -- s 0.1 0.01 5 7 3 2 5 7 3 2 5 7 3 2 1.0 10 1.0 0.1 23 57 23 57 10 it05923 t stg t f v cc =200v i c/ i b =5 i b2/ i b1 = --2.5 r load it05150 7 1.0 5 3 2 3 2 0.01 7 5 3 2 0.1 7 5 3 2 1.0 7 5 3 2 10 v be (sat) -- i c i c / i b =5 ta= --40 c 120 c 25 c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v 0.1 0.01 5 7 3 2 5 7 3 2 5 7 3 2 3 2 1.0 10 100 10 57 2 3 1.0 23 57 23 57 it06395 10ms 1ms dc operation s / b limited 100 s 50 s i cp =14a i c =7a tc=25 c single pulse 0 0.5 1.0 1.5 2.0 3.0 2.5 0 p c -- ta 40 20 100 120 60 80 140 160 ambient temperature, ta -- c collector dissipation, p c -- w no heat sink 0 10 20 30 40 50 60 70 0 p c -- tc 40 20 100 120 60 80 140 160 collector dissipation, p c -- w case temperature, tc -- c .com .com .com .com .com 4 .com u datasheet
2SC5960 no.7610-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of march, 2004. specifications and information herein are subject to change without notice. ps .com .com .com .com 4 .com u datasheet
|
