unisonic technologies co., ltd mmbta13 preliminary npn epitaxial silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r206-006.ca darlington transistor ? description the utc mmbta13 is a darlington transistor. ? features * collector-emitter voltage: v ces = 30v * collector dissipation: p c(mas) = 350 mw ? ordering information ordering number lead free halogen free package packing mmbta13l-ae3-r MMBTA13G-AE3-R sot-23 tape real ? marking
mmbta13 preliminary npn epitaxial silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r206-006.ca ? absolute maximum ratings (t a =25 c) parameter symbol ratings unit collector-base voltage v cbo 30 v collector-emitter voltage v ces 30 v emitter-base voltage v ebo 10 v collector dissipation v ebo 350 mw collector current i c 500 ma junction temperature t j 150 c storage temperature t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol test conditions min typ max unit collector-emitter breakdown voltage bv ces i c =100 a, i b =0 30 v collector cut-off current i cbo v cb =30v, i e =0 100 na emitter cut-off current i ebo v eb =10v, i c =0 100 na dc current gain h fe v ce =5v, i c =100ma 10000 collector-emitter satu ration voltage v ce(sat) i c =100ma, i b =0.1ma 1.5 v base-emitter on voltage v be(on) v ce =5v, i c =100ma 2.0 v current gain bandwidth product f t v ce =5v, i c =10ma, f=100mhz 125 mhz note: pulse test: pulse width<300 s, duty cycle=2% utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|