rn2107act~rn2109act 2010-04-06 1 toshiba transistor silicon pnp epitaxial type (pct process) (bias resi stor built-in transistor) rn2107act,RN2108ACT,rn2109act switching, inverter circuit, interface circuit and driver circuit applications ? extra small package (cst3) is applicable for extra high density fabrication. ? incorporating a bias resistor into a transistor reduces parts count. ? reducing the parts count enable the manufacture of ever more compact equipment and save assembly cost. ? complementary to rn1107act to rn1109act equivalent circuit and bias resistor values absolute maximum ratings (ta = 25c) * : mounted on fr4 board (10 mm 10 mm 1 mm) note: using continuously under heavy loads (e.g. the applic ation of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to dec rease in the reliability signif icantly even if the operating conditions (i.e.operatingtemperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and i ndividual reliability data (i.e. reliability test report and estimated failure rate, etc). unit: mm jedec D jeita D toshiba 2-1j1a weight: 0.75 mg (typ.) characteristics symbol rating unit collector-base voltage v cbo ?50 v collector-emitter voltage rn2107act to rn2109act v ceo ?50 v rn2107act ?6 RN2108ACT ?7 emitter-base voltage rn2109act v ebo ?15 v collector current i c ?80 ma collector power dissipation p c 100* mw junction temperature t j 150 c storage temperature range rn2107act to rn2109act t stg ? 55 to 150 c 0.250.03 1.00.05 0.650.02 0.350.02 0.150.03 0.250.03 0.50.03 0.60.05 0.38 +0.02 -0.03 0.050.03 0.050.03 cst3 1.base 2.emitter 3.collecotr top view type no. r1 (k ) r2 (k ) rn2107act 10 47 RN2108ACT 22 47 rn2109act 47 22 r1 r2 b c e
rn2107act~rn2109act 2010-04-06 2 electrical characteristics (ta = 25c) characteristics symbol test condition min typ. max unit i cbo v cb = ?50 v, i e = 0 ? ? ?100 collector cut-off current rn2107act to 2109act i ceo v ce = ?50 v, i b = 0 ? ? ?500 na rn2107act v eb = ?6 v, i c = 0 ?0.088 ? ?0.131 RN2108ACT v eb = ?7 v, i c = 0 ?0.085 ? ?0.126 emitter cut-off current rn2109act i ebo v eb = ?15 v, i c = 0 ?0.182 ? ?0.271 ma rn2107act 80 ? ? RN2108ACT 80 ? ? dc current gain rn2109act h fe v ce = ? 5 v, i c = ?10 ma 70 ? ? ? collector-emitter saturation voltage rn2107act to 2109act v ce (sat) i c = ? 5 ma, i b = ? 0.25 ma ? ? ?0.15 v rn2107act ?0.8 ? ?1.8 RN2108ACT ?1.0 ? ?3.0 input voltage (on) rn2109act v i (on) v ce = ? 0.2 v, i c = ?5 ma ?2.0 ? ?6.4 v rn2107act ?0.6 ? ?0.9 RN2108ACT ?0.7 ? ?1.2 input voltage (off) rn2109act v i (off) v ce = ? 5 v, i c = ?0.1 ma, ?1.5 ? ?2.6 v collector output capacitance rn2107act to 2109act c ob v cb = ?10 v, i e = 0, f = 1 mhz ? 0.9 ? pf rn2107act 8 10 12 RN2108ACT 17.6 22 26.4 input resistor rn2109act r1 ? 37.6 47 56.4 k rn2107act 0.17 0.213 0.255 RN2108ACT 0.374 0.468 0.562 resistor ratio rn2109act r1/r2 ? 1.71 2.14 2.56 ?
rn2107act~rn2109act 2010-04-06 3 ic - vi (on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi (on) (v) collector current ic (ma) common emitter vce = -0.2v 25 -25 ic - vi (off) -10 -100 -1000 -10000 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 input voltage vi (off) (v) collector current ic (ua) common emitter vce = -5v 25 -25 ta=100c ta=100c rn2107act rn2107act ic - vi (on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi (on) (v) collector current ic (ma) common emitter vce = -0.2v 25 -25 ic - vi (off) -10 -100 -1000 -10000 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 input voltage vi (off) (v) collector current ic (ua) common emitter vce = -5v 25 -25 ta=100c ta=100c RN2108ACT RN2108ACT ic - vi (on) -0.1 -1 -10 -100 -0.1 -1 -10 -100 input voltage vi (on) (v) collector current ic (ma) common emitter vce = -0.2v 25 -25 ic - vi (off) -10 -100 -1000 -10000 -0.5 -1 -1.5 -2 -2.5 -3 -3.5 input voltage vi (off) (v) collector current ic (ua) common emitter vce = -5v 25 -25 rn2109act rn2109act ta=100c ta=100c
rn2107act~rn2109act 2010-04-06 4 hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe common emitter vce = -5v 25 -25 vce (sat) - ic -0.01 -0.1 -1 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce (sat) ( v) common emitter ic / ib = 20 25 -25 ta=100c ta=100c rn2107act rn2107act hfe - ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe common emitter vce = -5v 25 -25 vce (sat) - ic -0.01 -0.1 -1 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce (sat) ( v) common emitter ic / ib = 20 25 -25 hfe- ic 10 100 1000 -1 -10 -100 collector current ic (ma) dc current gain hfe common emitter vce = -5v 25 -25 vce (sat) - ic -0.01 -0.1 -1 -1 -10 -100 collector current ic (ma) collector-emitter saturation voltage vce (sat) ( v) common emitter ic / ib = 20 25 -25 ta=100c ta=100c RN2108ACT RN2108ACT ta=100c ta=100c rn2109act rn2109act
rn2107act~rn2109act 2010-04-06 5 type name marking rn2107act RN2108ACT rn2109act type name c6 1 3 2 type name c7 1 3 2 type name c8 1 3 2
rn2107act~rn2109act 2010-04-06 6 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduction is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product?s quality a nd reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid sit uations in which a malfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, customers mu st also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specificati ons, the data sheets and application notes for product and the precautions and conditions set forth in the ?toshiba semiconduc tor reliability handbook? and (b) the instructio ns for the application with which the product will be used with or for. customers are solely responsible for all aspects of their own product design or applications, including but not lim ited to (a) determining the appropriateness of the use of this product in such des ign or applications; (b) evaluating and dete rmining the applicability of any information contained in this document, or in charts, dia grams, programs, algorithms, sample application circuits, or any other referenced document s; and (c) validating all operating paramete rs for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limit ation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equi pment used for automobiles, trains, ships and other transportation, traffic signalin g equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fi elds. do not use product for unintended us e unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any m ilitary purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technolog y products (mass destruction weapons). product and related softwa re and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulations. export and re-export of product or related softw are or technology are strictly prohibited except in comp liance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
