View HCPL0530R2V_4963289.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hcpl0xxx ?high speed transistor optocouplers ?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 april 2009 hcpl0452, hcpl0453, hcpl0500, hcpl0501, hcpl0530, hcpl0531, hcpl0534 high speed transistor optocouplers single channel: hcpl0452 hcpl0453 hcpl0500 hcpl0501 dual channel: hcpl0530 hcpl0531 hcpl0534 features high speed ?1 mbit/s 15kv/? minimum commone mode transient immunity at v cm = 1500v (hcpl0453/0534) open collector output guaranteed performance over temperature: 0? to 70? u .l. recognized (file # e90700) vde0884 recognized (?e#136616) ?approval pending for hcpl0530/0531/0453 ?ordering option v, e.g., hcpl0500v bsi recognized (?e# 8661, 8662) ?hcpl0452/0500/0501 only applications line receivers pulse transformer replacement output interface to cmos-lsttl-ttl wide bandwidth analog coupling description the hcpl05xx, and hcpl04xx optocouplers consist of an algaas led optically coupled to a high speed photo- detector transistor housed in a compact 8-pin small out- line package. a separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. the hcpl04xx devices do not have the base bonded out to a lead for additional noise margin. the hcpl053x devices have two channels per package for optimum mounting density. t ruth table (positive logic) schematics led v o on low off high 1 2 3 4 5 6 7 8 + _ v f v cc v b v o gnd * n/c n/c hcpl0500, hcpl0501 * base not connected for hcpl0452, hcpl0453 1 2 3 4 5 6 7 8 + _ v f1 v cc v 01 v 02 gnd v f2 _ + hcpl0530/hcpl0531/hcpl0534
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 2 hcpl0xxx ?high speed transistor optocouplers absolute maximum ratings (t a = 25? unless otherwise speci?d) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter value units t stg storage temperature -40 to +125 ? t opr operating temperature -40 to +85 ? re?w temperature pro?e (refer to page 11) emitter i f (avg) dc/average forward input current 25 ma i f (pk) peak forward input current (50% duty cycle, 1ms p.w.) 50 ma i f (trans) peak transient input current - ([ 1? p.w., 300 pps) 1.0 a v r reverse input voltage 5 v p d input power dissipation 45 mw detector i o (avg) average output current (pin 6) 8 ma i o (pk) peak output current 16 ma v ebr emitter-base reverse voltage (hcpl0500/hcpl0501 only) 5 v v cc supply voltage -0.5 to 30 v v o output voltage -0.5 to 20 v i b base current (hcpl0500/hcpl0501 only) 5 ma p d output power dissipation 100 mw
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 3 hcpl0xxx ?high speed transistor optocouplers electrical characteristics (t a = 0 to 70? unless otherwise speci?d) individual component characteristics t ransfer characteristics *all typicals at t a = 25? symbol parameter test conditions device min. typ.* max. unit emitter v f input forward voltage i f = 16ma, t a = 25? all 1.45 1.7 v i f = 16ma 1.8 bv r input reverse breakdown v oltage i r = 10? all 5.0 v ? v f / ? t a t emperature coefcient of f orward voltage i f = 16ma all -1.6 mv/? detector i oh logic high output current i f = 0ma, v o = v cc = 5.5v, t a = 25? all 0.001 0.5 ? i f = 0ma, v o = v cc = 15v, t a = 25? all 0.005 1 i f = 0 ma, v o = v cc = 15v all 50 i ccl logic low supply current i f = 16ma, v o = open, v cc = 15v hcpl0452/3/ 0500/1 120 200 ? hcpl0530/1 /4 400 i cch logic high supply current i f = 0ma, v o = open, v cc = 15v, t a = 25? all 0.01 1 a i f = 0ma, v o = open, v cc = 15v hcpl0452/3/ 0500/1 2 hcpl0530/1 /4 4 symbol parameter test conditions device min. typ.* max. unit coupled ctr current tranfer ratio (note 1) i f = 16ma, v o = 0.4v, v cc = 4.5v, t a = 25? hcpl0500/0530 7 2.7 50 % hcpl0452/3 19 27 50 hcpl0501/0531 i f = 16ma, v o = 0.5v, v cc = 4.5v hcpl0500 5 30 hcpl0452/3 15 30 hcpl0501/0534 v ol logic low output voltage i f = 16ma, i o = 1.1ma, v cc = 4.5v, t a = 25? hcpl0500 0.18 0.4 v hcpl0530 0.5 i f = 16ma, i o = 3ma, v cc = 4.5v, t a = 25? hcpl0452/3 0.25 0.4 hcpl0501/0531/4 i f = 16ma, i o = 0.8ma, v cc = 4.5v hcpl0500 hcpl0530 0.13 0.5 i f = 16ma, i o = 2.4ma, v cc = 4.5v hcpl0452/3 0.23 0.5 hcpl0501/0531/4
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 4 hcpl0xxx ?high speed transistor optocouplers electrical characteristics (continued) (t a = 0 to 70? unless otherwise speci?d) switching characteristics tv cc = 5v) isolation characteristics *all typicals at t a = 25? symbol parameter test conditions device min. typ.* max. unit t phl propagation delay time to logic low t a = 25?, r l = 4.1k ? , i f = 16ma (note 2) (fig. 9) hcpl0500/0530 0.45 1.5 ? r l = 1.9k ? , i f = 16ma, t a = 25? (note 3) (fig. 9) hcpl0452/3 0.45 0.8 hcpl0501/0531/4 r l = 4.1k ? , i f = 16ma (note 2) (fig. 9) hcpl0500/0530 2.0 r l = 1.9k ? , i f = 16ma (note 3) (fig. 9) hcpl0452/3 1.0 hcpl0501/0531/4 t plh propagation delay time to logic high t a = 25?, r l = 4.1k ? , i f = 16ma (note 2) (fig. 9) hcpl0500/0530 0.5 1.5 ? r l = 1.9k ? , i f = 16ma, t a = 25? (note 3) (fig. 9) hcpl0452/3 0.3 0.8 hcpl0501/0531/4 r l = 4.1k ? , i f = 16ma (note 2) (fig. 9) hcpl0500/0530 2.0 r l = 1.9k ? , i f = 16ma (note 3) (fig. 9) hcpl0452/3 1.0 hcpl0501/0531/4 |cm h | common mode tr ansient immunity at logic high i f = 0ma, v cm = 10v p-p , r l = 4.1kv, t a = 25? (note 4) (fig. 10) hcpl0500 1,000 10,000 v/? hcpl0530 i f = 0ma, v cm = 10v p-p , r l = 1.9k ? t a = 25?, (note 4) (fig. 10) hcpl0452 1,000 10,000 hcpl0501/31 hcpl0534 15,000 40,000 i f = 16ma, v cm = 1500v p-p , r l = 1.9 ? , t a = 25? (note 4) (fig. 10) hcpl0453 15,000 40,000 |cm l | common mode tr ansient immunity at logic low i f = 16ma, v cm = 10v p-p , r l = 4.1k ? , t a = 25? (note 4) (fig. 10) hcpl0500 1,000 10,000 v/? hcpl0530 i f = 16 ma, v cm = 10 v p-p , r l = 1.9k ? (note 4) (fig. 10) hcpl0452 1,000 10,000 hcpl0501/31 hcpl0534 15,000 40,000 i f = 16ma, t a = 25?, v cm = 1500 v p-p , c l = 15pf) (note 4) (fig. 10) hcpl0453 15,000 40,000 symbol characteristics test conditions min. typ.* max . unit v iso input-output isolation voltage f = 60 hz, t = 1.0 min., i i-o 2? (note 5, 6) 2500 vac rms r iso isolation resistance v i-o = 500v (note 5) 10 11 c iso isolation capacitance v i-o = 0 , f = 1.0mhz (note 5) 0.2 pf
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 5 hcpl0xxx ?high speed transistor optocouplers notes 1 current transfer ratio is designed as a ratio of output collector current, i o , to the forward led input current, i f , times 100%. 2. the 4.1 k ? load represents 1 lsttl unit load of 0.36 ma and 6.1k ? pull-up resistor. 3. the 1.9 k ? load represents 1 ttl unit load of 1.6 ma and 5.6 k ? pull-up resistor. 4. common mode transient immunity in logic high level is the maximum tolerable (positive) dv cm /dt on the leading edge of the common mode pulse signal v cm , to assure that the output will remain in a logic high state (i.e., v o >2.0 v). common mode transient immunity in logic low level is the maximum tolerable (negative) dv cm /dt on the trailing edge of the common mode pulse signal, v cm , to assure that the output will remain in a logic low state (i.e., v o <0.8 v). 5. device is considered a two terminal device: pins 1, 2, 3 and 4 are shorted together and pins 5, 6, 7 and 8 are shorted together. 6. 2500 vac rms for 1 minute duration is equivalent to 3000 vac rms for 1 second duration.
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 6 hcpl0xxx ?high speed transistor optocouplers t ypical performance curves fig. 1 normalized ctr vs. forward current i f - forward current (ma) 0.1 1 10 100 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 2 normalized ctr vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 normalized c tr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 3 output current vs. output voltage v o - output voltage (v) 02468101214161820 i o - output cur rent (ma) 0 2 4 6 8 10 12 14 16 i f = 5 ma i f = 10 ma i f = 15 ma i f = 20 ma i f = 25 ma i f = 30 ma i f = 35 ma i f = 40 ma normalized to: i f = 16 ma v o = 0.4 v v cc = 5 v t a = 25 c normalized to: t a = 25 c i f = 16ma v cc = 5 v v o = 0.4 v fig. 4 logic high output current vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 i oh - logic high o utput current (na) 0.1 1 10 100 1000 fig. 5 propagation delay vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 t p - propagation delay (ns) 0 100 200 300 400 500 600 700 800 r l = 1.9 k (tphl) r = 4.1 k (tplh) l r l = 1.9 k (tplh) r l = 4.1 k (tplh) fig. 6 propagation delay vs. load resistance r l = load resistance (k ? ) 1 10 t p - pr opagation dela y (ns) 100 1000 10000 i f - 16 ma (tphl) i f - 10 ma (tphl) i f - 10 ma (tplh) i f - 16 ma (tplh) t a = 25 c v cc = 5 v i f = 0 ma v cc = 5 v v o = 5 v i f = 16 ma v cc = 5 v v cc = 5 v t a = 25 c
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 7 hcpl0xxx ?high speed transistor optocouplers pulse gen cm v v ff b a +- +5 v o v - i f 3 4 + f v - 2 1 shield noise 6 o 5 gnd 7 8 v b v cc v l r plh ol v v o 0 5 v 1.5 v f i 1.5 v t phl t sw itch at a : i = 0 ma f sw itch at a : i = 16 ma f t r v o o v ol v 5 v 0 v 10% 10% 90% cm v 10 v 4 5 noise 1 2 3 shield 8 7 6 +5 v o v v cc v 01 v 02 gnd v f1 - + f2 v - f i + 10% duty cycle i/f < 100 s f i monitor l r c = 1.5 f l pulse generator tr = 5ns z = 50 o gnd + 4 5 1 3 2 - f2 v v f1 - shield noise +5 v cc 8 v l v 6 02 v 7 r 01 v o v cm a b pulse gen f i +- + 3 i monitor f 4 i/f < 100 s 10% d.c. tr = 5ns generator pulse z = 50 o + v f i f - 2 1 shield noise v o o 6 5 gnd 7 8 v b v l r cc v +5 v 0.1 f l c = 1.5 f 0.1 f test circuit for hcpl0452, hcpl0453, hcpl0500 and hcpl0501 test circuit for hcpl0530, hcpl0531 and hcpl0534 test circuit for hcpl0452, hcpl0453, hcpl0500 and hcpl0501 test circuit for hcpl0530, hcpl0531 and hcpl0534 f t 0.1 f 0.1 f ff v m r m r 90% fig. 8 common mode immunity test circuit fig. 7 switching time test circuit
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 8 hcpl0xxx ?high speed transistor optocouplers package dimensions 8-pin soic surface mount recommended pad layout pa c kage drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package speci?ations do not expand the terms of fairchilds worldwide terms and conditions, speci?ally the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www .f airchildsemi.com/pac kaging/ lead coplanarity: 0.004 (0.10) max 0.202 (5.13) 0.182 (4.63) 0.021 (0.53) 0.011 (0.28) 0.050 (1.27) typ. 0.164 (4.16) 1 8 0.144 (3.66) 0.244 (6.19) 0.224 (5.69) 0.143 (3.63) 0.123 (3.13) 0.008 (0.20) 0.003 (0.08) 0.010 (0.25) 0.006 (0.16) seating p lane 0.024 (0.61) 0.050 (1.27) dimensions in inches (mm). 0.155 (3.94) 0.275 (6.99) 0.060 (1.52)
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 9 hcpl0xxx ?high speed transistor optocouplers ordering information marking infomation option order entry identi?r description v v vde 0884 (approval pending for hcpl0530, hcpl0531 & hcpl0534) r2 r2 tape and reel (2500 units per reel) r2v r2v vde 0884 (approval pending for hcpl0530, hcpl0531 & hcpl0534), t ape and reel (2500 units per reel) de?itions 1 fairchild logo 2 device number 3 vde mark (note: only appears on parts ordered with vde option ?see order entry table) 4 one digit year code, e.g., ? 5 two digit work week ranging from ?1 to ?3 6 assembly package code 1 2 6 4 3 5 500 s yy x v
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 10 hcpl0xxx ?high speed transistor optocouplers carrier tape speci?ations 4.0 0.10 1.5 min user direction of feed 2.0 0.05 1.75 0.10 5.5 0.05 12.0 0.3 8.0 0.10 0.30 max 8.3 0.10 3.50 0.20 0.1 max 6.40 0.20 5.20 0.20 1.5 0.1/-0
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 11 hcpl0xxx ?high speed transistor optocouplers re?w pro?e pro?e freature pb-free assembly pro?e t emperature min. (tsmin) 150? t emperature max. (tsmax) 200? time (t s ) from (tsmin to tsmax) 60?20 seconds ramp-up rate (t l to t p ) 3?/second max. liquidous temperature (t l ) 217? time (t l ) maintained above (t l ) 60?50 seconds p eak body package temperature 260? +0? / ?? time (t p ) within 5? of 260? 30 seconds ramp-down rate (t p to t l ) 6?/second max. time 25? to peak temperature 8 minutes max. time (seconds) te mperature ( c) ti me 25? to peak 260 240 220 200 180 160 140 120 100 80 60 40 20 0 t l t s t l t p t p ts m a x ts m i n 120 preheat area max. ramp-up rate = 3?/s max. ramp-down rate = 6?/s 240 360
?003 fairchild semiconductor corporation www.fairchildsemi.com hcpl0xxx rev. 1.0.4 12 tradem arks th e following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its global subsidiaries ,and is not in tended to be an exhaustive list of all such trademarks. auto-spm build it now coreplus corepower crossvolt ctl current transfer logic ecospark e fficentmax ezswitch* * fair child fairchild semiconductor fa ct quiet series fact f ast fa stvcore fetbench flashwriter * fps f-pfs frfet global power resource sm green fps green fps e-series g max gto in tellimax isoplanar me gabuck mi crocoupler microfet mi cropak m illerdrive moti onmax mo tion-spm optologic op toplanar pdp spm powe r-spm po we rtrench powerxs pr ogrammable active droop qfet qs quiet series r apidconfigure saving our world, 1mw/w/kw at a time sm artmax smart start spm stealth s uperfet sup ersot -3 s upersot -6 s upersot -8 s upremos syncfet sy nc-lock * th ep ower franchise ti nyboost tinybuck ti nylogic tinyopto tinypower tinypwm tinywire trifault detect t ruecurrent * serdes uhc ultra frfet unifet vcx vi sualmax xs *t rademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fa i rchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild? worldwide terms and conditions, specifically the warranty therein, which covers t hese products. li fe support policy fa i rchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are in tended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance wi th instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. an ti -counterfeiting policy fairchild semiconductor corporation's anti-counterfeiting policy. fairchild's anti-counterfeiting policy is also stated on our external websi te, www.fairchildsemi.com, under sales support. c ounterfeiting of semiconductor parts is a growing problem in the industry. all manufacturers of semiconductor products are experiencing counterf eiting of their parts. cu stomers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, faile da pplications, and increased cost of production and manufacturing delays. fairchild is taking strong measures to protect ourselves and our customers from the proli feration of counterfeit parts. fairchild strongly encourages customers to purchase fairchild parts either directly from fairchild or from authorized fairchi ld dist ributors who are lis ted by country on our web page cited above. products customers buy either from fairchild directly or from authorized fairchild distributors are ge nuine parts, have full traceability, meet fairchild's quality standards for handling and storage and provide access to fairchild's full range of up-to-date technica land product information. fairchild and our authorized distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. fairc hild will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. fairchild is committed to combat this global problem and encou rage our customers to do their part in stopping this practice by buying direct or from authorized distributors. product status definitions defi nition of terms da tasheet identification product st atus definition ad vance information formative / in design datasheet contains the design specifi cations for product development. s pecifications may change in any manner without notice. pr eliminary datasheet contains preliminary data; supplementary data will be published at a later date. fairchild se mi conductor reserves the right to make changes at any time without notice to improve design. no i dentification needed full production datasheet contains final specifications. fairchi ld semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product that is discontinued by fairchild semiconductor. th e datasheet is for reference information only. rev. i40 first production hcpl0xxx ?high speed transistor optocouplers

▲Up To Search▲

Price & Availability of HCPL0530R2V

	To Download HCPL0530R2V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .