the moving coil type indicator receives various types of input signals, dc voltage, dc current, and signals from thermocouple and resistance bulbs. 1. input signal can be directly connected. 2. high input impedance (1m ? at 1 to 5v dc input). no adjusting resistor is required for thermocouple input. 3. compact and lightweight design. measuring input: signal a; 1 to 5v dc b; 4 to 20ma dc dc current d; 0 to 100 a ....... 200ma dc dc voltage e; 0 to 10mv ........ 5v dc thermocouple f; 0 to 10mv dc or more (with reference junction compen- sator) (upper limit overshoot burnout circuit is available on request) thermocouple g; 10mv dc span or more (with reference junction compen- sator) (upper limit overshoot burnout circuit is available on request) resistance bulb h; jpt100 ? 50 c span or more 3-wire type w; pt100 ? 50 c span or more 3-wire type slide resistant (resistance span; 100 ? ) j; 3-wire type k; 2-wire type (with adjusting resistor) opening angle transmitter (resistance span: 100 ? ) l; 3-wire type (zero point and span adjustable) input signal input resistance allowable input signal source resistance 1 to 5v others 4 to 20ma others 2k ? or less 100 ? or less voltage current 1m ? 40k ? to 1m ? 5 ? 1 to 100 ? 100 ? or less (50 ? or less when burnout is provided) 40 to 600k ? thermocouple resistance 6 ? or less per wire allowance: 1.0% of full scale scale length: 100mm response time: within 3 sec (time required for stabilizing the indicator pointer within 1.5% after applying input corresponding to 2/3 (approx.) of full scale) power supply: 100v 10% ac, 50/60hz *200v 10% ac, 50/60hz, or *24v ac, 50/60hz power consumption: approx. 1.8va max. ambient temperature: 10 to +50 c ambient humidity: 30 to 90%rh enclosure: steel case external dimensions (h w d): 48 144 210mm mass{weight}: approx. 1.5kg finish color: munsell 7.5bg 3.2/0.8 or equivalent scope of delivery: indicator and mounting bracket input resistance and allowable input signal source resistance: +15% 10% data sheet paj moving coil type indicator features specifications date EDS10-45E july. 15, 1993
?asterisked (*) items; non-standard 1. product name 5. power supply 2. code symbols 6. application 3. input 7. other necessary information 4. scale mounting method: panel flush mounting standard; horizontal mounting on vertical panel non-standard; tilted mounting, vertical mounting specify ? when mounting on tilted panel code symbols outline diagram (unit : mm) connection diagrams ordering information 12345678 9 description paj 0 2 input signal 1 to 5v dc 4 to 20ma dc 0 to 100 a.....200ma dc 0 to 10mv.....5v dc 0 to 10mv dc or more (with reference junction compensator) 10mv dc span or more (with reference junction compensator) resistance bulb jpt100 ? 50 c span or more, 3-wire type resistance bulb pt100 ? 50 c span or more, 3-wire type slide resistant, 3-wire type slide resistant, 2-wire type (with circuit adjusting resistor) for opening angle indicator (resistance; 100 ? , zero point and span adjustable) other inputs power supply 24v ac 50/60hz 100v ac 50/60hz 200v ac 50/60hz a b d e f g h w j k l z 1 3 5 * * * mounting method horizontal mounting vertical mounting notes: symbols of resistance bulbs are as follows. jpt100 previous jis standard pt100 new jis standard 1 2 application for general use for zener barrier connection specify "3" only when connecting to zener barrier (pwzb3 or pwzb4) with thermocouple or resistance bulb input used. 0 3 paj information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
