.913 - .000 + .004 23.19 .00 + .10 4x .126 - .000 + .004 3.20 .00 + .10 .906 23.00 .906 23.00 .453 11.51 3.417 86.79 2.524 64.11 9/16" [14.29] wrench flat 11/16" [17.46] wrench flat .748 19.00 .905 22.99 mark: kings 7763-400-f1102p .906 sq. 23.00 1.140 sq. 28.96 4x .135 3.43 catalog p/n:7763-400-f1102p 6. optical: wavelength: 1250nm - 1625nm insertion loss: 0.3db typical, 0.5db max return loss: > -45db, -50db typical 7. replacement kits: contact kit: 7760-000-00702z 8. cable preparation and stripping procedure: cap-tbd. 9. red ldpe dust cap included (not shown) 10. crimp tooling: for factory application use hand tool kth-1000 and die kth-2035 for field application use hand tool kth-5000 and die kth-5018 11. electrical and optical contacts included notes: unless otherwise specified 1. interface compliant to smpte 304 specification. 2. material specifications: contacts: copper alloy o-rings and strain relief: silicone rubber all plastic parts: 20% glass filled polypropylene all other metal parts: 303 stainless steel per astm a582 3. finish specifications: stainless steel parts: passivate contacts: .000100 min gold per astm b488 over .000080 min nickel per ams-qqn-290 (rohs) 4. electrical specifications: low voltage contacts: 42 - 60 vac, 1 amp aux electrical contacts: 600 vac, 10 amp 5. environmental: operating temperature rating: -40c to 75c non-operating/storage temperture rating: -40c to 85c humidity: <95 rh (at 40c) mounting hole .913 - .000 + .004 23.19 .00 + .10 4x .126 - .000 + .004 3.20 .00 + .10 .906 23.00 .906 23.00 .453 11.51 a tri lock smpte panel mount xxx drk 01/26/11 by date appd preliminary per er 30232 description 01 rev 02/01/11 jcf date approved xx/xx/xx xxx date approved 02/01/11 psm date approved 01/26/11 drk date drawn customer sales drawing .xxx [x.xx] sht rev of 01 1 2 SD7763-400-F1102P winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf029 b decimal: .xx [x.x] .xxxx [x.xxx] angles: per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: scale: .01 [0.3] .xxxx 2 1:1 .005 [0.13] 4 hole, jack, cable
|
