do not scale from this print .1200 ref 3.048 .0550 1.397 .0100 ref 0.254 .0060 ref 0.152 2 max sway (typ) "a" "a" -lc: locking clip option shown lc-08-tm-01 .2450 ref 6.223 .2850 7.239 ref .0200 ref 0.508 .1500 ref 3.810 (no of positions x.0315[.80]) + .2075[5.27] ref (no of positions -1) x .0315[.80] .1195 ref 3.035 .0283 0.718 bse-xxx-01-d c2 01 02 cbse-xxx-01-x-d-xx no of positions -020, -040, -060, -080, -090, -100, -120 (per row) row specification -d: double (use bse-xxx-01-d-x) option -a: alignment pins (use bse-xxx-01-d-a) -lc: locking clips (use lc-08-tm-01) plating specification -c: electro-polished selective (use c-126-01-c) lead style -01: .1280 [3.25] .1280 3.251 (see note 4) .2950 ref 7.493 .070 ref 1.765 .006 ref 0.147 .0375 0.953 section "a"-"a" c3 c1 see table 1 (no of positions x .0315[.80]) + .1625[4.13] ref -a: alignment pin option shown bse-xxx-01-d-a cbse-060-01-x-d-a shown .0350 ref 0.889 .0375 ref 0.953 .0375 ref 0.953 r tube: pt-1-24-03-78 plug: tp-09 packaging view c c-126-01-x fig. 1 cbse-060-01-x-d-lc shown obsolete sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.25] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .8mm double row socket assembly by: cbse-xxx-01-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. perry 10/04/2007 1 1 sheet scale: 1.5:1 insulator: black lcp socket:phos bronze f:\dwg\misc\mktg\cbse-xxx-01-x-d-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .0015 [.04] max. 3. minimum pushout force: .5 lb. 4. max varience: .002 [.05] 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision a
|