www.roithner - laser.com 1 vc 85 0m - to46 gl - 3pin v 1.0 1 5 . 0 5 .201 4 description vc 850 - h - to46gl - 3pin is a multi mode infra red vcsel emitting at typically 85 0 nm with rated output power of 2 mw cw, mounted into a standard to - 46 package and sealed with a glass lens cap. the vcsel works under low forward current and voltage. maximum ratings parameter symbol values min. max. unit forward current i f 1 2 ma reverse voltage (@ 10a) v f 5 v operating temperature t case 0 + 8 5 c storage temperature t stg - 40 + 100 c lead solder temperature * t sld + 260 c * must be completed within 10 seconds electro - optical characteristics (t case =25c) thermal characteristics parameter symbol values min. typ. max. unit emission wavelength peak 840 85 0 86 0 nm spectral width ? 0.85 nm optical output power p o 2 mw beam divergence ? 2 threshold current i th 1.5 3 ma operating current i f 6 ma operating voltage v f 1. 8 2. 2 v breakdown voltage v b - 10 v slope efficiency 0. 3 0. 4 0.7 mw/ma dynamic resistance r d 20 3 5 5 5 parameter symbol values min. typ. max. test conditions unit i th temperature variation i th 1 .0 t c =0 to 8 5 c ma temperature variation ? / t - 0. 5 t c =0 to 85 c, 6 ma %/c temperature variation ? / t 0.06 t c =0 to 8 5 c, 6 ma nm/c
www.roithner - laser.com 2 outline dimensions all dimensions in mm electrical connection precautions static electricity: vcsels are sensitive to electrostatic discharge (esd) . precautions against esd must be taken when handling or operating these vcsels. surge voltage or electrostatic discharge can result in complete failure of the device. safety advice: this vcsel emits concentrated infrared light which can be hazardous to the human eye and skin . this diode is classi fied as class 3b laser product accordin g to iec 60825 - 1 and 21 cfr part 1040.10 safety standards . operation: do only operate vcsels with a current source. running these leds from a vo ltage source will r esult in complete failure of the device. current of a led is an exponential function of the voltage across it. usage of current regulated drive circuits is mandatory. ? all rights reserved the above specifications are for reference purpose only and subjected to change without prior notice to46gl to - 46 with glass lens lead description pin 1 ld anode pin 2 ld cathode pin 3 n .c.
|