View M150XN07V2_7868565.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ver 0.1 1/29 product specification m150xn07 v.2 au optronics corporation product specification 15.0 xga color tft-lcd module model name: m150xn07 v.2 approved by prepared by cc chiu tc tsai ddbu marketing division / au optronics corporation customer checked & approved by www..net
ver 0.1 2/29 product specification m150xn07 v.2 product specification 15.0 xga color tft-lcd module model name: m150xn07 v.2 ( u ) preliminary specifications ( ) final specifications note: this specification is subject to change without notice. www..net
ver 0.1 3/29 product specification m150xn07 v.2 contents 1.0 handling precautions.............................................................5 2.0 general description...............................................................6 2.1 display characteristics ..............................................................................................................6 2.2 optical characteristics ...............................................................................................................7 3.0 functional block diagram....................................................12 4.0 absolute maximum ratings.................................................13 4.1 tft lcd module ......................................................................................................................13 4.2 backlight unit ............................................................................................................................13 4.3 absolute ratings of environment ............................................................................................13 5.0 electrical characteristics......................................................14 5.1 tft lcd module ......................................................................................................................14 5.1.1 power specification.............................................................................................................................14 5.1.2 signal electrical characteristics...........................................................................................................15 5.2 backlight unit ............................................................................................................................16 6.0 signal characteristic............................................................17 6.1 pixel format image ...................................................................................................................17 6.2 the input data format ...............................................................................................................18 6.3 signal description ....................................................................................................................19 6.4 interface timing ........................................................................................................................20 6.4.1 timing characteristics.........................................................................................................................20 6.4.2 timing diagram....................................................................................................................................21 6.5 power on/off sequence .......................................................................................................22 7.0 connector & pin assignment...............................................23 7.1 tft lcd module ......................................................................................................................23 7.2 backlight unit ............................................................................................................................24 7.3 signal for lamp connector .......................................................................................................24 8.0 reliability............................................................................25 9.0 safety..................................................................................26 9.1 sharp edge requirements ......................................................................................................26 9.2 materials ....................................................................................................................................26 9.2.1 toxicity................................................................................................................................................26 9.2.2 flammability........................................................................................................................................26 9.3 capacitors .................................................................................................................................26 10.0 other requirement.............................................................26 10.1 national test lab requirement .............................................................................................26 10.2 label ........................................................................................................................................26 www..net
ver 0.1 4/29 product specification m150xn07 v.2 11.0 mechanical characteristics................................................27 record of revision version and date page old description new description remark 0.1 2005/02/14 all first edition for customer www..net
ver 0.1 5/29 product specification m150xn07 v.2 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press or pat the panel surface by fingers,hand or tooling. 9) do not press the reflector sheet at the back of the module to any directions. 10) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 11) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 12) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. www..net
ver 0.1 6/29 product specification m150xn07 v.2 2.0 general description this specification applies to the 15.0 inch color tft/lcd module m150xn07 v2. this module is designed for a display unit of personal computer. the display supports the xga (1024 (h) x 768(v)) screen format and 16.2m colors (rgb 6-bits + frc data). all input signals are 1 channel lvds interface compatible. this module does not contain an inverter card for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 381 (15 ) active area [mm] 304.128 (h) x 228.096 pixels h x v 1024(x3) x 768 pixel pitch [mm] 0.297 (per one triad) x 0.297 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance [cd/m 2 ] 250 (typ) @ 8ma contrast ratio 500 : 1 (typ) optical rise time/fall time [msec] 12 (typ) (note 1) color saturation 65% ntsc nominal input voltage vdd [volt] +3.3 v power consumption (vdd line + ccfl line) [watt] 13.3 w (typ.) @8ma (all black pattern) weight [grams] 1100 (typ) min. typ. max. horizatal(h) 326.0 326.5 327.0 vertical(v) 253.0 253.5 254.0 physical size [mm] depth(d) - - 12.0 electrical interface 1 channel lvds support color 16.2m colors (rgb 6-bit + frc data) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 surface treatment hard-coating (3h), anti-glare treatment note 1 : system should warm up for at least one hour www..net
ver 0.1 7/29 product specification m150xn07 v.2 l c d m o d u l e pr-880 / bm5a / bm7 module driving equipment measuring distance 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) tbd 65 65 - vertical (up) cr = 10 (down) tbd 65 55 keep total 120(mayb e 60,60) horizontal (right) cr = 5 (left) tbd tbd viewing angle [degree] vertical (up) cr = 5 (down) tbd tbd contrast ratio normal direction tbd 500 - rising time - tbd tbd falling time - tbd tbd response time [msec] rising + falling - 12 note 1 red x 0.61 0.64 0.67 red y 0.30 0.33 0.36 green x 0.27 0.30 0.33 green y 0.56 0.59 0.62 blue x 0.12 0.15 0.18 color / chromaticity coordinates (cie) blue y 0.07 0.10 0.13 white x 0.28 0.31 0.34 color coordinates (cie) white white y 0.30 0.33 0.36 white luminance @ ccfl 8ma (center) [cd/m 2 ] 200 250 - luminance uniformity [%] 75 80 note 2 crosstalk (in 75hz) [%] 1.2 1.5 note 3 flicker db -20 note 4 equipment pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm-5a , bm 7 ,cs-1000, ca210, sr_3 & ez contrast(eldim)* ) aperture 1 with 50cm viewing distance test point center (vesa point 9) environment < 1 lux www..net
ver 0.1 8/29 product specification m150xn07 v.2 * ez contrast is different measurement tool with very close viewing distance. www..net
ver 0.1 9/29 product specification m150xn07 v.2 note 1: definition of response time the output signals of photo detector are measured when the input signals are changed from black to white (rising time), and from white to black (falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. note 2: brightness uniformity of these 9 points is defined as below % 100 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 50 % 90 % 90 % 50 % 10 % 10 % 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r www..net
ver 0.1 10/29 product specification m150xn07 v.2 note 3: crosstalk is defined as below : unit: percentage of dimension of display area l l a -l a l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b -l b l / l b x 100%= 1.5% max., l a and l b are brightness at location a and b note 4: test paterm: subchecker pattern at 127 gray level r g b r g b r g b r g b r g b r g b 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a b 184 gray level 184 gray level gray level = l127 gray level = l0 30 a fft 0 a sub checker pattern ca210 30mm www..net
ver 0.1 11/29 product specification m150xn07 v.2 level dc hz) 30 level(at ac log 20 (db) flicker = amplitude time dc ac www..net
ver 0.1 12/29 product specification m150xn07 v.2 3.0 functional block diagram the following diagram shows the functional block of the 15.0 inches wide color tft/lcd module: cwy20g C a0g16 / msb240420 jst-bhr-03vs-1 mating type : hrs df14-20s-1.25c sm02(8.0)b-bhs-1-tb 2 ccfl c o n n e c t o r dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1024(3)*768 pixels x - driver ic y - d r i v e r i c g1 g768 d1 d3072 inverter dc power au asic rsds transmitte r lvds + 3.3v www..net
ver 0.1 13/29 product specification m150xn07 v.2 4.0 absolute maximum ratings absolute maximum ratings of the module is as following: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive vdd 0.3 +3.6 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions ccfl current ircfl - 8.5 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operating humidity hop 8 90 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 8 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality perfermance, please refer to auo iis(incoming inspection standard) . please refer the graph below for the corresponding of temperature and humidity." www..net
ver 0.1 14/29 product specification m150xn07 v.2 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symbol parameter min typ max units condition vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current - 600 700 [ma] vin=3.3v , gray bar pattern, at 60hz irush lcd inrush current - - 3 [a] note pdd vdd power 2.0 2.3 [watt] vin=3.3v , gray bar pattern, at 60hz vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p vin=3.3v , all black pattern, at 75hz note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d 2 s d 1 d 5 d 6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0 v 3.3 v 470 us +3.3v www..net
ver 0.1 15/29 product specification m150xn07 v.2 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - 100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage 1.1 - 1.45 [v] vth/vtl = 100mv note note: lvds signal waveform vth vid vtl vicm vss www..net
ver 0.1 16/29 product specification m150xn07 v.2 5.2 backlight unit parameter guideline for ccfl inverter symbol parameter min. typ. max. unit condition ircfl ccfl operation range 2.5 8 8.5 [ma] rms (ta=25 o c) note 4 icfl ccfl inrush current - - 20 [ma] fcfl ccfl frequency 40 55 80 [khz] (ta=25 o c) note 1 vicfl (0 o c) (reference) ccfl ignition voltage 1450 - - [volt] rms (ta=0 o c) note 3 vicf (25 o c) (reference) ccfl ignition voltage 1100 - - [volt] rms (ta=25 o c) note 3 vcfl ccfl discharge voltage - 620 (@8ma) 710 (@2.5ma) [volt] rms (ta=25 o c) note 2 pcfl ccfl power consumption @8ma(excluding inverter) - 10 11 [watt] (ta=25 o c) note 2 note 1 : ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd. note 2 : calculator value for reference (ircflxvcflx2=pcfl). note 3 : ccfl inverter should be able to give output a voltage more than 1450 volt. lamp units need 1450 volt minimum for ignition. note 4 : ccfl life time is 30,000hr at 8.0ma, it s defined as when the brightness is reduced by half. it s recommended not to exceed 8.0ma for ccfl life time concern and it s prohibited to exceed 8.5ma for safety concern. www..net
ver 0.1 17/29 product specification m150xn07 v.2 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. www..net
ver 0.1 18/29 product specification m150xn07 v.2 6.2 the input data format devshs og0 or5or4or3or2or1or0 ob0 og3 og4og1 og2 ob1 og5 ob5ob3 ob4ob2 or7 ob7 or6 ob6 og7og6 clkin+ rin0 +/- clkin- rsvd current cycle rin1 +/- rin2 +/- rin3 +/- note1 : please follow pswg. note2 : 8-bit in note3 : r/g/b data 7:msb, r/g/b data 0:lsb www..net
ver 0.1 19/29 product specification m150xn07 v.2 6.3 signal description the module using a pair of lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. cwy20g-a0d1t (ptwo) or msb240420 (stm) pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 vss ground 4 vss ground 5 rin0- - lvds differential data input (r0-r5, g0) 6 rin0+ + lvds differential data input (r0-r5, g0) 7 vss ground 8 rin1- - lvds differential data input (g1-g5, b0-b1) 9 rin1+ + lvds differential data input (g1-g5, b0-b1) 10 vss ground 11 rin2- - lvds differential data input (b2-b5, hs, vs, de) 12 rin2+ + lvds differential data input (b2-b5, hs, vs, de) 13 vss ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 vss ground 17 rin3- - lvds differential data input (r6-r7, g6-g7,b6-b7) 18 rin3+ - lvds differential data input (r6-r7, g6-g7,b6-b7) 19 vss ground 20 vss ground note: please follow pswg. www..net
ver 0.1 20/29 product specification m150xn07 v.2 6.4 interface timing 6.4.1 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal parameter symbol min typ max unit clock timing clock frequency clk 50 65 81 mhz horizontal active thd 1024 1024 1024 tclk horizontal blanking thbl 40 320 400 tclk hsync timing horizontal period th 1064 1344 1424 tck vertical active tvd 768 768 768 th vertical blanking tvbl 8 38 75 th vsync timing vertical period tv 776 806 843 th note:de mode only note: typical value refer to vesa standard www..net
ver 0.1 21/29 product specification m150xn07 v.2 6.4.2 timing diagram www..net
ver 0.1 22/29 product specification m150xn07 v.2 6.5 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. 10% 10% 10% 10% 10% 90% 90% 0 min. 0 min. 1sec min. 10ms max. vin lamp on signal 0 v 0 v 0 v 200ms www..net
ver 0.1 23/29 product specification m150xn07 v.2 7.0 connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation interface connector / interface card manufacturer p-two or compatible type part number cwy20g C a0g16 / msb240420 mating housing part number hrs df14-20s-1.25c pin# signal name pin# signal name 1 vdd 2 vdd 3 vss 4 vss 5 rin0- 6 rin0+ 7 vss 8 rin1- 9 rin1+ 10 vss 11 rin2- 12 rin2+ 13 vss 14 clkin- 15 clkin+ 16 vss 17 rin3- 18 rin3+ 19 vss 20 vss www..net
ver 0.1 24/29 product specification m150xn07 v.2 7.2 backlight unit connector name / designation for lamp connector manufacturer jst or compatible type / part number bhr-03vs-1 mating type / part number sm02(8.0)b-bhs-1-tb 7.3 signal for lamp connector pin symbol description 1 hv lamp high voltage 2 nc no connection 3 lv ground u cable length: 140 +- 5 mm u connector-output position: right side (front view) u lamp assembly design shall be easy for replacement and repair. www..net
ver 0.1 25/29 product specification m150xn07 v.2 8.0 reliability reliability test condition no test item test condition 1 temperature humidity bias (thb) 50 , 80%, 300hours 2 high temperature operation (hto) 50 , 300hours 3 low temperature operation (lto) 0 , 300hours 4 high temperature storage (hts) 60 , 300hours 5 low temperature storage (lts) -20 , 300hours 6 thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 7 on/off test on/10sec, off/10sec, 30,000 cycles 8 shock test (non-operating) 50g, 20ms, half-sine wave (+ x, + y, + z) 9 vibration test (non-operating) 1.5g(10~200hz p- p), 30 minutes each axis (x, y, z) 10 esd (electrostatic discharge) contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point 11 altitude test operation:10,000 ft non-operation:30,000 ft 12 drop test the drop height is 60cm www..net
ver 0.1 26/29 product specification m150xn07 v.2 9.0 safety 9.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 9.2 materials 9.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 9.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 9.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. 10.0 other requirement 10.1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, information technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) 10.2 label the label is on the panel as shown below: www..net
ver0.2 27/29 11.0 mechanical characteristics www..net
ver0.2 28/29 www..net
ver0.2 29/29 www..net

▲Up To Search▲

Price & Availability of M150XN07V2

	To Download M150XN07V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .