wideband power amplifier rwp03 160 - 10 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 1 / 5 version 1 . 7 product features applications ? gan on sic broadband high power amplifier ? 20 ~ 5 0 0mhz operation bandwidth ? small signal gain 4 1 db min. ? 16 0w minimum . @ psat ? general purpose description the power amplifier module is designed for broadcasting, telecommunication, medical and other markets. operating frequency range is from 20 ~ 5 0 0mhz. gallium nitride on sic technology is used and attached on an aluminum sub carrier. full in/out matching for broadban d performance is already applied. improved ther mal handling by patented technology. electrical specifications @ v cc = 28v; t c = 4 5 c ; z s = z l = 50? note. *. gate on/off : high speed switching **. drain on/off : 300ms delay parameter u nit m in t yp m ax c ondition operating frequency mhz 20 - 5 0 0 - small signal gain db 4 1 4 3 4 5 - gain variation vs frequency dbpp - 1 1.5 - p 3 db dbm 50 52 - 20 ~ 5 00mhz oip3 @ po = + 4 3dbm (1mhz tone spacing, cw 2 - tone) dbm 50 54 - 20 ~ 5 0 0 mhz input return loss db - - 11 - 7 - n th harmonic suppression dbc 15 25 - cw 1 - tone @po = p1 dbm supply voltage v 27.5 28 30 vcc(=vds) quiescent current consumption a - 7 7.5 - current consumption @ p 3 db a - 11 13 cw 1 - tone on/off switching time * us - 3 5 on : ttl "low" off : ttl "high"(30ma@disable) shut down or switch on/off ttl voltage ** v 0 - 0.5 on : ttl low(enable) 2.5 5 5.5 off : ttl high package type : d p - 100
wideband power amplifier rwp03 160 - 10 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 2 / 5 version 1 . 7 absolute maximum ratings parameter u nit r ating input rf power dbm 1 5 supply voltage v 30 load mismatch value - 3 : 1 @all load phase * input signal condition : cw 1 - t one environmental characteristics parameter u nit m in t yp m ax symbol operating case temperature c - 10 - 80 tc storage temperature c - 40 - 105 tstg vibration mil - std - 810g method 514.6 annex c vi ordering information part number package rwp03 1 6 0 - 1 0 pallet rwp03 16 0 - 1 r pallet with stainless steel sma connectorized * rwp03160 - 1r is a sma connectorized version of rwp0 3160 - 10. electrical parameters are all same as rwp03160 - 10. for more information, please contact rfhic mechanical specifications par ameter u nit t yp dimension L 120 (l) x 65 (w) x 16.7 (h) weight g 240 rwp03160 - 1r rf connector - sma female dc connector - smw420 - 06p cooling - external heat - sink * dimension and weight may change without notice.
wideband power amplifier rwp03 160 - 10 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 3 / 5 version 1 . 7 typical performance @ 25 c frequency p1db p3db psat current @p1db current @p3db current @p sat gp @ p3db pae @ p3db n th harm onic @po = p1dbm oip3 @4 0dbm/tone 2 nd har 3 rd har (mhz) (dbm) (dbm) (dbm) (a) (a) (a) (db) (%) (dbc) (dbm) 20 48.1 51.0 52.3 6.60 8.30 8.9 39.50 54.17 - 43.2 - 23.1 56.6 100 48.1 52.1 5 3.0 7.08 10.18 11.1 40.10 56.90 - 40.0 - 20.6 56.5 200 48.2 52.3 53.0 7.30 11.04 12.0 40.70 54.94 - 46.1 - 23.1 56.2 300 48.0 51.1 52.1 7.01 9.73 11.1 40.90 47.29 - 35.2 - 24.9 55.4 400 48.0 51.2 52.0 7.13 9.07 9.9 40.90 51.91 - 38.9 - 42.9 55.3 5 0 0 48.0 52.0 52.4 7.57 10.98 11.0 40.20 51.55 - 57.9 - 45.9 54.4 precautions 1. this product is designed to be used for broadband amplification. heat generation is higher when there is no rf signal in the device. therefore, the worst case scenario is whe n there is no rf signal, and the amplifier is on with current draw. the temperature must be calculated properly. case temperature must maintain below 8 0 c . 2. thermal grease or metal thermal interface materials are recommen ded for heat dissipation. an exa mple would be spreading thermal grease on the bottom of the device
wideband power amplifier rwp03 160 - 10 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 4 / 5 version 1 . 7 package dimensions (type : dp - 100) * u nit: mm[inch] | tolerance: 0.2[.008] interface connector pin no port name function 1 vcc( 28v) 28vdc 2 vcc( 28v) 28vdc 3 switch on/off switching time : 5us max enable : ttl low or open, disable : ttl high (low : 0~0.5v, high : 2.5~5v) disable status : 20ma current consumption 4 gnd dc ground 5 gnd dc ground 6 shut down enable : ttl low or open, disable : ttl high (low : 0~0.5v, high : 2.5~5v) disable status : 20ma current consumption * interface connector information : smw420 - 06 p(yeonho electronic, wafer), smh 420 - 06(yeonho electronic, housing) * recommended screw torque : 8.0kgf.cm 1 using sems m3 15mm bolt
wideband power amplifier rwp03 160 - 10 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 5 / 5 version 1 . 7 revision history part number release date version modification data sheet status rwp03160 - 10 2014.5 .2 3 1.7 mechanical specifications addition - rwp03160 - 10 2014.4.2 1.6 mechanical specifications - rwp03160 - 10 2014.1.7 1.5 pallet with sta inless steel connectorized addition ( ordering information ) - rfhic corporation reserves the right to make changes to any products herein or to discontinue any pr oduct at any time without notice. while product specifications have been thoroughly examine d for reliability, rfhic corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and d isclaims any and all liability, including without limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction o f the product can be expected to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, prot ect and hold rfhic corporation and its directors, officers, stockholders, employees, representatives and distributors harmless agai nst any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local authorized geographic distributor for r fhic corporation. for cus tomers in the us, please contact the us sales team at 919 - 6 77 - 8780 . for all other inquiries, please contact the international sales team at 82 - 31 - 250 - 5078.
|
