MPS3906 to-92 characteristic symbol min max unit off characteristics collector- emitter breakdown voltagef1) (ic = -1.0 madc, lb = 0) collector- base breakdown voltage (ic = -10|iadc, ie = o) emitter- base breakdown voltage (le = -10|iadc, lc = 0) collector cutoff current (vce = -30 vdc, veb(0ff) = -3.0 vdc) base cutoff current (vce = -30 vdc, veb(off) = -3.0 vdc) v(br)ceo v(br)cbo v(br)ebo 'cex ibl ^0 -40 -5.0 ? ? ? ? ? -50 -50 vdc vdc vdc nadc nadc 1. pulse test: pulse width = 300 (is; duty cycle = 2.0%. nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders.
MPS3906 electrical characteristics (ta = 25c unless otherwise noted) (continued) characteristic symbol min max unit on characteristics(i) dc current gain (ic = -0.1 madc, vce = -1 0 vdc) (1c = -1 0 madc, vce = ~1 -0 vdc) (lc = -10 madc, vce = ~1 -0 vdc) (1c = -50 madc, vce = ~1 - vdc) (1c = -1 00 madc, vce = ~1 -0 vdc) collector- emitter saturation voltage (1c = -10 madc, ib = -1 .0 madc) oc = -50 madc, ib = -5.0 madc) base -emitter saturation voltage (1c = -10 madc, ib = -1.0 madc) (1c = -50 madc, ib = -5.0 madc) hfe vce(sat) vbe(sat) 60 80 100 60 30 ? ? -0.65 ? ? ? 300 ? ? -0.25 -0.4 -0.85 -0.95 ? vdc vdc small-signal characteristics current- gain ? bandwidth product (1c = -10 madc, vce = -20 v, f = 100 mhz) output capacitance (vcb = -5.o vdc, ie = o, f = 1 .0 mhz) input capacitance (veb = -0.5 vdc, lc = 0, f = 1 .0 mhz) input impedance (1c = -1 0 madc, vce = -10 vdc, f = 1 .0 khz) voltage feedback ratio (1c = -1 .0 madc, vce = -10 vdc, f = 1 .0 khz) small-signal current gain (lc = -1 .0 madc, vce = -1 vdc. f = 1 -0 khz) output admittance (1c = -1 .0 madc, vce = ~1 vdc, f = 1 .0 khz) noise figure (1c = -1 00 padc, vce = -5-0 vdc, rs = 1 .0 k i, f = 1 .0 khz) fr cobo cjbo nie hre hfe hoe nf 250 ? ? 2.0 1.0 100 3.0 ? ? 4.5 10 12 10 400 60 4.0 mhz pf pf kq x10-4 ? (imhos db switching characteristics delay time rise time storage time fall time (vcc = -3- vdc< vbe(off) = +-5 vdc, lc --10 madc, ibi - 10 madc) (vcc = -3- vdc, lc = -10 madc, ibi - ib2 ? 1-0 madc) td tr ts tf ? ? __ ? 35 50 600 90 ns ns ns ns 1. pulse test: pulse width = 300 us; duty cycle = 2.0%.
|
