. fx-4400 high output xenon flashlamp www.perkinelmer.com/opto datasheet description the new fx-4400 light source from perkinelmer optoelectronics is a compact, high-output, long-life pulsed xenon flashlamp that offers exceptional arc stability, microsecond pulse durations and a high-intensity continuous line spectrum from the deep uv to the far ir. the lamp utilizes an integral parabolic reflector to provide a collimated output beam and is capable of operating at up to 60 watts average power. this new design measures approximately the same size as our traditional pulsed xenon lamps, yet provides up to 20x the light output intensity. this allows customers the option of either taking advantage of the greatly increased light output or operating the fx-4400 at a reduced input energy for increased lamp life and stability. lamp life exceeds 1 billion flashes, when operating at an input energy of up to 0.5 joules per flash. the maximum flash rate is 1 khz for an input energy of 60 millijoules. several window materials are available to provide customers with transmission output ranging from 160nm to 20 microns. perkinelmer will work closely with oem's to customize the light source and related electronics to meet the most demanding applications. also, our broad technical expertise in light sources, optics, detectors, light management and signal processing allows us to work with and provide oem's with unique sensor solutions that generate, control and measure light. features up to 20x the output intensity of traditional xenon style lamps exceptional arc stability long life continuous spectrum uv-vis-ir collimated output beam ideal for use with optical lenses and fiber bundles low optical noise microsecond flash durations various window materials (transmissions ranging from 160nm to 20 microns) high repetition flash rates no warm-up period required compact size optoelectronics preliminary data
fx-4400 high output xenon flashlamp energy per flash (joules) 1 average power (watts) 2 voltage (volts) flash rate (hz) 3 life (flashes) 4 output stability 5 lite pac power supply 1.0 max 60 400 - 1000 1000 > 1 x 10 9 < 3% fyd-4400 ps4400 electrical specifications (all lamps) lamp type fx-4400 fx-4401 fx-4402 fx-4403 spectral distribution 275 - 2000+ 190 - 2000+ 160 - 4000 600 - 20,000 window material borosilicate uv glass sapphire znse electrical specifications (all lamps) notes: 1) input energy or e = ?cv 2 where e = discharge energy (joules) c = discharge capacitor value v = discharge voltage the lamp is capable of an input energy higher than 1.0 j/flash but long life can not be guaranteed. 2) maximum average power or p ave = ef where p ave = average power (watts) e = discharge energy f = rate of flashes in pulses per second additional cooling required when operating above 40 watts. 3) flash rate must be set so as not to exceed 60-watts average power. (see note 2) to operate the lamp at greater than 1000hz consult with a perkinelmer product specialist. 4) life is primarily a function of input energy per flash (e = ?cv 2 ) but is also influenced by average power and peak current. see curves on this page for typical lamp performance. 5) typical for most operating conditions. lamp output stability is dependent on a number of variables including input energy, flash rate, optics design, lite pac and power supply. arc gap reflector geometry weight window diameter 0.060 inch (1.5mm) parabolic y2 = 0.5x inches 125 grams 1.0 inch (25.4mm) physical dimensions ?0.13 1 pl ?0.08 3 pl. 0.11 ?1.24 ?1.30 0.40 1.05 1.21 outline drawing fx-4400 beam angle 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 angle (degrees) relative irradiance input energy = 1 joule distance = 23" photometric radiometric distance (lux per flash) (mj/cm^2 per flash) 12" 7.8e2 5.5e-4 24" 2.2e2 1.5e-4 36" 1.0e2 6.9e-5 output beam angle
lamp life and peak current vs. input energy 1.00e+08 1.00e+09 1.00e+10 0 100 200 300 400 500 600 700 800 900 1000 1100 input energy (mj per flash) lamp life (# of flashes) 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 peak current (amps) lamp life (# flashes) peak current (amps) notes: 1) a 0.8 uh choke must be included in the cathode side of the discharge circuit for an input energy of 0.8j and above. 2) number of flashes to 50% of initial radiometric light output. 3) forced-air cooling required above 40 watt operation. lamp life spectral output 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 200 300 400 500 600 700 800 900 1000 1100 wavelength (nm) relative irradiance spectral output fx-4400 pulse width (t=1/3 peak) 0 1 2 3 4 5 6 0 100 200 300 400 500 600 700 800 900 1000 1100 input energy (mj ) pulse width (usec) pulse width
? 2002 perkinelmer, inc. all rights reserved. . usa: perkinelmer optoelectronics 35 congress street salem, ma 01970 toll free: (800) 950-3441 (usa) phone: (978) 745-3200 fax: (978) 745-0894 europe: perkinelmer optoelectronics wenzel-jaksch-str. 31, d-65199 weisbaden, germany phone: +49 (0) 611-492-437 fax: +49 (0)611-492-159 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: +65 775 1008 ds307 rev a 0202 www.perkinelmer.com/opto fyd--4400 and ps-4400 lite-pacs? and power supplies fyd--4400 outline and inputs voltage dc current peak current trigger opto isolated trigger vref (vo/vref=226) emi suppression 24 vdc 10% 3a @ 24 vdc 5.2a @ 24 vdc (1) yes 1.77 - 4.42 vdc (2) ps-4400 inputs 3.00 (76.2) 1.13 (28.7) fyd-4400 trigger input: discharge energy: average power: lead length: 0.22f @ 17515% 1.0 joules max. 60 watts (1) 12 inches (30.5) 1) additional cooling required when operated above 40 watts. discharge voltage (vo) power internal discharge capacitor trigger trigger voltage trigger capacitor trigger rate 400-1000 vdc 2% 60 watts 0.47f (3) 175 vdc 15 0.22 f 1000 hz max ps-4400 output notes: 1) 20 to 50 ma peak input; 10 to100 sec pulse width; leading edge trigger, internal series resistor 150 ohms. 2) inductor and filter capacitor for power input. all inputs through shielded connector. 3) standard value is 0.47 f, 0.1, 0.22, 0.33, 0.94, and 1.88 f also available. 4x r.07 5.58 5.19 .20 .96 5.22 7.18 4.81 2.13 ps-4400 outline drawing weight input connector output connector enclosure 24 oz (680 g) 9 pin ?d? screw clamp terminal strip metal mechanical specifications operating temperature storage temperature 32 to 104f (0 to 40c) -40 to 194f (-40 to +90c) environmental specifications
|
