smd type led suntan ? TSL-1206UY000MTH f e a t u r e s ? wide viewing angle 120 o ? reflow solderable ? high luminous intensity and low power dissipation ? good reliability and long life ? complied with rohs directive a p p l i c a t i o n s ? optical indicator ? indoor display ? backlighting in dashboard and switch ? flat backlighting for lcd, symbol and display ? general use t e c h n i c a l d a t a s h e e t this product is generally used as indicator and luminary for electronic equipment such as household appliance, communication quipment and dashboard. e notes: 1. all dimension units are millimeters. 2 . all dim ension tolerance is 0.2mm unless otherwise noted. selection guide luminous intensity (mcd) @ 20ma viewing angle dice lens type min typ max 2?1/2 yellow (aigainp) water clear 50 100 150 120 note: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. the above luminous intensity measurement allowance tolerance 10% electrical / optical characteristics at ta=25 parameter symbol min. typ. max units test conditions forward voltage vf 1.8 2.0 2.4 v if=20ma reverse current ir -- -- 10 ua vr=5v dominate wavelength d 585 -- 596 nm if=20ma absolute maximum ratings at ta=25 parameter symbol rating units power dissipation pd 100 mw dc forward current if 25 ma peak forward current 1 ifp 100 ma reverse voltage vr 5 v electrostatic discharge (hbm) esd 2000 v operating temperature topr -30~+85 storage temperature tstg -40~+100 note: 1. 1/10 dut cycle, 0.1ms pulse width. 2. the above forward voltage measure ment allowance tolerance 0.1v. suntan ? technology company limited website: www.suntan.com.hk email: info@suntan.com.hk tel: (852) 8202 8782 fax: (852) 8208 6246
smd type led suntan ? TSL-1206UY000MTH typical optical characteristics curves ambient temperature vs. forward current suntan ? technology company limited website: www.suntan.com.hk email: info@suntan.com.hk tel: (852) 8202 8782 fax: (852) 8208 6246
smd type led suntan ? TSL-1206UY000MTH carrier tape all dimensions in mm, tolerances unless mentioned is 0.1mm. moisture resistant packaging note: specification are subject to change without notic e. for more detail and update, please visit our website. suntan ? technology company limited website: www.suntan.com.hk email: info@suntan.com.hk tel: (852) 8202 8782 fax: (852) 8208 6246
|