View PE3VNA2603_8876536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 confguration ? connector 1: 3.5mm male ? connector 2: 3.5mm male ? cable type: pe-vna-r features ? designed for use as vna test port extenders ? excellent vswr and insertion loss ? stainless steel armoring provides crush resistance ? non conductive protective outer sleeve ? t orsion resistant connector heads ? rugged connector interface with machined strain relief collar ? excellent amplitude and phase stability with fexure ? each serialized assembly comes with test data ? in stock and ready to ship applications ? v ector network analyzer test port extenders ? precise bench top testing ? lab and production testing . description pasternack ruggedized vna test cables are designed to provide customers with repeatable accurate vna measurements. these test cables have excellent electrical properties including low insertion loss, low vswr and phase stability of +/- 3 with fexure. torsion resistant connector heads are directly attached to stainless steel conduit style armoring providing a rug - ged design for up to 5,000 mattings cycles with proper care. the cable armoring enhances amplitude and phase stability by preventing stress due to over bending while maintaining the fexibility required for testing in a lab environment. when used with the appropriate calibration kit these test cables effectively extend the test port of the vna allowing for accurate measure - ments of devices that cannot be directly connected to a network analyzer test port. electrical specifcations description minimum t ypical maximum units frequency range dc 26.5 ghz vswr 1.25:1 velocity of propagation 70 % rf shielding 90 db capacitance 29.4 [96.46] pf/ft [pf/m] phase stability with flexure 3 degrees . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male to 3.5mm male cable using ruggedized vna test coax, rohs PE3VNA2603 PE3VNA2603 rev 1.1 vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs rf cable assemblies technical data sheet PE3VNA2603
2 specifcations by frequency description f1 f2 f3 f4 f5 units frequency 12 18 26.5 ghz insertion loss (max.) 0.41 0.52 0.64 db/ft [1.35] [1.71] [2.1] [db/m] vswr (max.) 1.25:1 1.25:1 1.25:1 power handling (max.) 65 watts . mechanical specifcations cable assembly . one time minimum bend radius 4 in [101.6 mm] cable cable type pe-vna-r impedance 50 ohms inner conductor type solid inner conductor material and plating copper , silver dielectric type ptfe number of shields 3 shield layer 1 silver plated copper braid shield layer 2 silver plated copper tape shield layer 3 silver plated copper braid jacket material pet jacket diameter 0.43 in [10.92 mm] connectors description connector 1 connector 2 type 3.5mm male 3.5mm male impedance 50 ohms 50 ohms connection method standard standard contact material and plating beryllium copper , gold beryllium copper , gold dielectric type pctfe pctfe coupling nut material and plating passivated stainless steel passivated stainless steel body material and plating passivated stainless steel passivated stainless steel . mechanical specifcation notes: crush resistance: 1,050 lbs. jacket material is a pet weave over a spiral stainless steel sheath PE3VNA2603 rev 1.1 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male to 3.5mm male cable using ruggedized vna test coax, rohs PE3VNA2603 rf cable assemblies technical data sheet PE3VNA2603 vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs
3 environmental specifcations temperature operating range +125 deg c compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: ? values at 25c, sea level. typical performance data PE3VNA2603 rev 1.1 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male to 3.5mm male cable using ruggedized vna test coax, rohs PE3VNA2603 rf cable assemblies technical data sheet vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs PE3VNA2603
4 how to order part number confguration: PE3VNA2603 - xx uu | | | unit of measure: | | cm = centimeters | | = inches | length | base number example: PE3VNA2603-12 = 12 inches long cable PE3VNA2603-100cm = 100 cm long cable vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male to 3.5mm male cable using ruggedized vna test coax, rohs PE3VNA2603 url: http://www.pasternack.com/3.5mm-male-3.5mm-male-vna-cable-cable-assembly-PE3VNA2603-p.aspx PE3VNA2603 rev 1.1 rf cable assemblies technical data sheet vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs PE3VNA2603
5 PE3VNA2603 rev 1.1 vna ruggedized test cable 3.5mm male to 3.5mm male 26.5ghz, rohs PE3VNA2603 cad drawing

▲Up To Search▲

Price & Availability of PE3VNA2603

Part #	Manufacturer	Description	Price	BuyNow Qty.
PE3VNA2603-24 3985-PE3VNA2603-24-ND	Pasternack Enterprises	VNA Ruggedized Test Cable 3.5mm	100: USD1737.2 50: USD1818 25: USD1919 1: USD2020	12
PE3VNA2603-48 3985-PE3VNA2603-48-ND	Pasternack Enterprises	VNA Ruggedized Test Cable 3.5mm	100: USD1625.4 50: USD1701 25: USD1795.5 1: USD1890	3
PE3VNA2603-36 3985-PE3VNA2603-36-ND	Pasternack Enterprises	VNA Ruggedized Test Cable 3.5mm	100: USD1917.8 50: USD2007 25: USD2118.5 1: USD2230	3
PE3VNA2603-60 3985-PE3VNA2603-60-ND	Pasternack Enterprises	VNA Ruggedized Test Cable 3.5mm	100: USD1883.4 50: USD1971 25: USD2080.5 1: USD2190	2

Part #	Manufacturer	Description	Price	BuyNow Qty.
PE3VNA2603 PE3VNA2603	Pasternack Enterprises	Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm. VNA Ruggedized Test Cable 3.5mm Male to 3.5mm Male 26.5GHz, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5GHz, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5GHz, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE3VNA2603, can also be known as a 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE3VNA2603 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 26.5 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5GHz, RoHS.		20
PE3VNA2603-36 PE3VNA2603-36	Pasternack Enterprises	Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 36 inches. VNA Ruggedized Test Cable 3.5mm Male to 3.5mm Male 27GHz 36 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 36 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 36 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our test 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE3VNA2603-36, can also be known as a test 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE3VNA2603-36 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 27 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 36 inch length, RoHS.	1: USD2230 25: USD2118.5 50: USD2007 100: USD1917.8	3
PE3VNA2603-24 PE3VNA2603-24	Pasternack Enterprises	Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 24 inches. VNA Ruggedized Test Cable 3.5mm Male to 3.5mm Male 26.5 GHz 24 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 24 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 24 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our test 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE3VNA2603-24, can also be known as a test 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE3VNA2603-24 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 26.5 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 24 inch length, RoHS.	1: USD2020 25: USD1919 50: USD1818	12
PE3VNA2603-60 PE3VNA2603-60	Pasternack Enterprises	Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 60 inches. VNA Ruggedized Test Cable 3.5mm Male to 3.5mm Male 27GHz 60 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 60 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 60 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our test 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE3VNA2603-60, can also be known as a test 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE3VNA2603-60 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 27 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm male to 3.5mm male 27GHz 60 inch length, RoHS.	1: USD2190 25: USD2080.5 50: USD1971 100: USD1883.4	2
PE3VNA2603-48 PE3VNA2603-48	Pasternack Enterprises	Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 48 inches. VNA Ruggedized Test Cable 3.5mm Male to 3.5mm Male 26.5 GHz 48 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 48 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 48 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our test 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. This 3.5mm to 3.5mm cable is a male to male coax assembly, PE3VNA2603-48, can also be known as a test 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE3VNA2603-48 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 26.5 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Test 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 3.5mm male to 3.5mm male 26.5 GHz 48 inch length, RoHS.	1: USD617.73 25: USD586.84 50: USD555.96	3

	To Download PE3VNA2603 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .