EFRP-S2307H 1u 300w server redundant power supply features: 1u slim (erp1u) form factor, 300w with atx outputs 85% power efficiency pmbus support n+1 redundancy / load sharing 0~50 working temperature dimension: 106(w) x 41.2(h) x 355(d) mm general specification input range : 100 to 240 vac, +/10% power factor: 0.95 minimum efficiency: 80% @ 115vac hold up time: 16ms @ 80% load short circuit protection over current protection over voltage protection no load operation over temperature protection mtbf >100,000 hours@25 operating temperature: 0 to 50 operating humidity: 20 to 90 % emi/rfi: ce, fcc class b safety: ul, cb, tuv, ccc, bsmi input and output characteristics input output voltage frequency current load +3.3v +5v +12v 12v 5v +5vsb 100~240 vac 47~63hz 5~2.5a max.load 20a 20a 24a 0.5a 3a min.load 0.5a 0.5a 1a 0a 0.1a note: 1. +3.3v and +5v combined output shall not ex ceed 110w 2. total combined output shall not exceed 300w ripple and noise output +3.3v +5v +12v 12v 5vsb load regulation 5% 5% 5% 5% 5% line regulation 1% 1% 1% 1% 1% ripple & noise 60mv 60mv 120mv 120mv 60mv
mechanical outline dimension: 106x41.2x355(mm) outline drawing ?etasis electronic corporation. all rights reserved . etasis electronics corporation reserves the right to make changes to their products, specification, or to discontinue any prod uct and its service at anytime without notice. the information and specification from etasis is believed to be accurate and reliable. how ever, etasis assumes no responsibility for any busi ness loss due to specification changes. etasis products are not designed to be use d in system deemed to be critical, or in any system wherein failure or malfunction could result in injury or death.
|