VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 1 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast rectifier, 15 a fred pt ? features ? state of the art low forward voltage drop ? ultrafast soft recovery time ? 175 c operating junction temperature ? low leakage current ? fully isolated package (v ins = 2500 v rms ) ? true 2 pin package ? designed and qualified according to jedec ? -jesd 47 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 description state of the art, ultralow v f , soft-switching ultrafast rectifiers optimized for discon tinuous (critical) mode (dcm) power factor correction (pfc). the minimized conduction loss, optimized stored charge and low recovery current mi nimized the switching losses and reduce over dissipation in the switching element and snubbers. the device is also intended for use as a freewheeling diode in power supplies and other po wer switching applications. applications ac/dc smps 70 w to 400 w ? e.g. laptop and printer ac adaptors, desktop pc, tv and monitor, games units and dvd ac/dc power supplies. product summary package 2l to-220ac, 2l to-220fp i f(av) 15 a v r 600 v v f at i f 0.85 v t rr (typ.) 60 ns t j max. 175 c diode variation single die 2l to-220ac 2l to-220 full-pak ba s e cathode 2 3 anode 1 cathode 2 anode 1 cathode v s -etl1506-m 3 v s -etl1506fp-m 3 absolute maximum ratings parameter symbol test conditions values units peak repetitive reverse voltage v rrm 600 v average rectified forward current in dc i f(av) t c = 157 c 15 a full-pak t c = 120 c non-repetitive peak surge current i fsm t j = 25 c 200 operating junction and storage temperatures t j , t stg -65 to +175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditio ns min. typ. max. units breakdown voltage, ? blocking voltage v br , v r i r = 100 a 600 - - v forward voltage v f i f = 15 a - 0.99 1.07 i f = 15 a, t j = 150 c - 0.85 0.91 reverse leakage current i r v r = v r rated - 0.01 15 a t j = 150 c, v r = v r rated - 6 100 junction capacitance c t v r = 600 v - 12 - pf series inductance l s measured lead to lead 5 mm from package body - 8 - nh
VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 2 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dynamic recovery characteristics (t j = 25 c unless otherwise specified) parameter symbol test conditions min. typ. max. units reverse recovery time t rr i f = 1 a, di f /dt = 100 a/s, v r = 30 v - 60 110 ns i f = 15 a, di f /dt = 100 a/s, v r = 30 v - 185 270 t j = 25 c i f = 15 a ? di f /dt = 200 a/s ? v r = 390 v - 210 - t j = 125 c - 290 - peak recovery current i rrm t j = 25 c - 20 - a t j = 125 c - 26 - reverse recovery charge q rr t j = 25 c - 2.2 - c t j = 125 c - 4.0 - thermal - mechanical specifications parameter symbol test conditions min. typ. max. units maximum junction and storage temperature range t j , t stg -65 - 175 c thermal resistance, ? junction to case r thjc -1.21.4 c/w full-pak - 3.7 4.3 thermal resistance, ? junction to ambient r thja typical socket mount - - 70 typical thermal resistance, ? case to heatsink r thcs mounting surface, flat, smooth and greased - 0.5 - weight -2-g -0.07- oz. mounting torque 6 (5) - 12 (10) kgf cm (lbf in) marking device case style 2l to-220ac etl1506 case style 2l to-220 full-pak etl1506fp
VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 3 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junc tion capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics forward voltage drop - v f (v) instantaneous forward current - i f (a) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 10 100 tj = 25c tj = 150c tj = 175c 100 200 300 400 500 600 0.0001 0.001 0.01 0.1 1 10 100 150c 175c 25c 50c 75c 125c 100c reverse current - i r (a) reverse voltage - v r (v) reverse voltage - v r (v) junction capacitance - c t (pf) 0 100 200 300 400 500 600 1 10 100 1000 t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 d = 0.01
VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 4 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum thermal impedance z thjc characteristics (full-pak) fig. 6 - maximum allowable case temperature vs. average forward current fig. 7 - maximum allowable case temperature vs. average forward current (full-pak) fig. 8 - forward power loss characteristics t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 1e+01 1e+02 0.1 1 10 single pulse (thermal resistance) d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 d = 0.01 average forward current - i f (av) (a) allowable case temperature (c) 0 2 4 6 8 10 12 14 16 140 150 160 170 180 dc average forward current - i f (av) (a) allowable case temperature (c) 0 2 4 6 8 10 12 14 16 60 80 100 120 140 160 180 dc average forward current - i f (av) (a) average power loss ( watts ) 0 4 8 12 16 20 24 0 5 10 15 20 d = 0.01 d = 0.02 d = 0.05 d = 0.1 d = 0.2 d = 0.5 dc rms limit
VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 5 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - typical reverse recovery vs. di f /dt fig. 10 - typical stored charge vs. di f /dt fig. 11 - reverse recovery parameter test circuit fig. 12 - reverse recovery waveform and definitions trr ( ns ) di f /dt (a/s ) 100 1000 100 150 200 250 300 350 400 if = 15 a, 125c if = 15 a, 25c typical value qrr ( c ) di f /dt (a/s ) 100 1000 0 1 2 3 4 5 6 if = 15 a, 125c if = 15 a, 25c typical value irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve defined by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
VS-ETL1506-M3, vs-etl1506fp-m3 www.vishay.com vishay semiconductors revision: 08-jul-15 6 document number: 93531 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per tube minimum order quantity packaging description VS-ETL1506-M3 50 1000 antistatic plastic tube vs-etl1506fp-m3 50 1000 antistatic plastic tube links to related documents dimensions 2l to-220ac www.vishay.com/doc?95259 2l to-220 full-pak www.vishay.com/doc?95260 part marking information 2l to-220ac www.vishay.com/doc?95391 2l to-220 full-pak www.vishay.com/doc?95392 3 - t = to-220 4 - l = hyperfast recovery time 5 - current code: 15 = 15 a 6 - voltage code: 06 = 600 v 7 - fp = full-pak none = to-220 e = single diode 2 - circuit configuration: 1 - vishay semiconductors product - environmental digit: -m3 = halogen-free, rohs-compliant and terminations lead (pb)-free 8 device code 5 1 3 2 4 6 7 8 vs- e t l 15 06 fp -m3
outline dimensions www.vishay.com vishay semiconductors revision: 05-dec-12 1 document number: 95259 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 true 2 pin to-220 dimensions in millimeters and inches notes (1) lead dimension and fini sh uncontrolled in l 1 ? these dimensions are within allowable dime nsions of jedec to-220ab re v. j outline dated 3-24-87 ? controling dimension: inch e a f te r m . 4 e d l 0.150" ref. 0.002" 0.05 mm h 1 ? p q b 1 l 1 b j 1 c 12 ? 2.0 mm ref. 60 45 b a symbol millimeters inches min. max. min. max. a 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 14.99 15.49 0.590 0.610 e 10.04 10.41 0.395 0.410 e 5.08 bsc 0.200 bsc f 1.22 1.37 0.048 0.054 h 1 5.97 6.47 0.235 0.255 j 1 2.54 2.79 0.100 0.110 l 13.47 13.97 0.530 0.550 l 1 (1) 3.31 3.81 0.130 0.150 ? p 3.79 3.88 0.149 0.153 q 2.60 2.84 0.102 0.112
outline dimensions www.vishay.com vishay semiconductors revision: 05-dec-12 1 document number: 95260 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 true 2 pin to-220 full-pak dimensions in millimeters and inches ? q e a f e l h 1 c j 1 b d l 1 q 2 q 1 b 1 symbol millimeters inches min. max. min. max. a 4.53 4.93 0.178 0.194 b 0.71 0.91 0.028 0.036 b 1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 d 15.67 16.07 0.617 0.633 e 9.96 10.36 0.392 0.408 e 5.08 typical 0.200 typical f 2.34 2.74 0.092 0.107 h 1 6.50 6.90 0.256 0.272 j 1 2.56 2.96 0.101 0.117 l 12.78 13.18 0.503 0.519 l 1 2.23 2.63 0.088 0.104 ? q 2.98 3.38 0.117 0.133 q 1 3.10 3.50 0.122 0.138 q 2 14.80 15.20 0.583 0.598 ? 0 5 0 5
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
