coaxial cable 086 smrsm model series hand tm the big deal product overview the 086 series hand-flex coaxial cables are ideal for interconnection of coaxial components or sub-systems. the construction includes a silver-plated copper-clad steel center conductor which maintains the shape after bending. the outer shield is copper braid, tin soaked, which minimizes signal leakage and at the same time fexible for easy bend. dielectric is low loss ptfe. connectors have passivated stainless-steel coupling nut over a gold plated connector body and gold plated, brass center conductor. key features case style: kp1573-xx xx= cable length in inches ? hand formable with tight bend radius ? 18 ghz right-angle connector ? excellent return loss and insertion loss ? ideal for interconnect of assembled systems 50 ? dc to 18 ghz feature advantages hand-formable rf cables the 086 series hand-flex cables are hand formable making them ideal for use integrating coaxial components and sub-assemblies without the need for special cable-bending tools and alleviating the risk of damage during the bending process typical of semi-rigid coaxial cable assemblies. tight bend radius capable of only 6mm bend radius, the 086 hand flex series is able to make connections in tight spaces making these cables ideal for dense system integration. 18 ghz right-angle connector using a custom right-angle connector, the 086 smrsm series is able to meet system requirements of 90 connections without bending and sacrifcing high frequency performance up to 18 ghz. excellent return loss ? 28 db typ. at 6 ghz ? 23 db typ. at 18 ghz the 086 series hand-flex cables are ideally suited for interconnecting a wide variety of rf components while minimizing vswr ripple contribution due to mating cables & connectors. good power handling capability: ? 211w at 0.5 ghz ? 35w at 18 ghz mini-circuits 086 cable series can support medium to high rf power levels enabling these cables to be used in the transmit path. (power rating is at sea-level altitudes) built in anti-torque nut mini-circuits 086 series hand flex cables include an anti-torque feature to support the straight sma connector body during installation alleviating risk of stress to the connector/cable interface. jacketed and unjacketed options standard 086 series cables include a blue fep insulator jacket reducing the risk of accidental shorting of dc power lines or active pins during installation and operation. un-jacketed versions are available upon request. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
rev. or m 168535 086-11SMRSM+ rs/cp/am 180618 typical performance data 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 3000 6000 9000 12000 15000 18000 insertion loss (db) frequency (mhz) 086- 11smrsm+ insertion loss frequency (mhz) insertion loss (db) return loss (db) sma-male right angle sma-male 0 10 20 30 40 50 60 0 3000 6000 9000 12000 15000 18000 return loss (db) frequency (mhz) 086- 11smrsm+ return loss sma-male right angle sma-male features ? right-angle connection capable of dc to 18 ghz ? low loss, 1.07 db typ. at 18 ghz ? excellent return loss, 23 db typ. at 18 ghz ? hand formable to almost any custom shape without special bending tools ? 6mm bend radius for tight installations ? anti-torque nut prevents cable stress during installation ? insulated outer jacket standard ? connector interface, meets mil-std-348 ? ideal for interconnect of assembled systems applications ? replacement for custom bent 0.086" semi-rigid cables ? communication receivers and transmitters ? military and aerospace system ? environmental and test chambers 50 ? 11 inch dc to 18 ghz connectors model conn1 conn2 right angle sma-male sma-male 086-11SMRSM+ case style: kp1573-11 086-11SMRSM+ 1. custom sizes available, consult factory. outline dimensions ( ) inch mm a b c1 c2 d 11.0 .36 .313 .250 .36 279.40 9.14 7.95 6.35 9.14 e1 e2 f g t wt .313 .250 .108 .634 0.1 grams 7.95 6.35 2.75 16.10 2.54 11.03 coaxial cable hand tm cable construction center conductor: silver plated copper clad steel dielectric: solid ptfe outer shield: copper braid, tin soaked jacket: fep, blue (unjacketed cable also available upon request) connectors: coupling nut: stainless steel passivated body: stainless steel gold plated center pin: brass, gold plated outline drawing maximum ratings operating temperature -55c to 105c storage temperature -55c to 105c power handling at 25c, 211w at 0.5 ghz sea level 150w at 1 ghz 101w at 2 ghz 59w at 6 ghz 45w at 10 ghz 35w at 18 ghz permanent damage may occur if any of these limits are exceeded. 100 0.06 39 40 1000 0.23 49 47 2000 0.31 38 40 2500 0.35 51 52 4000 0.46 33 30 5000 0.51 34 33 6000 0.57 30 28 7000 0.62 33 31 8000 0.66 41 38 9000 0.71 34 34 10000 0.75 38 36 12000 0.85 23 23 14000 0.90 41 31 17000 1.03 29 23 18000 1.07 27 23 electrical specifcations at 25c parameter condition (ghz) min. typ. max. unit frequency range dc 18 ghz length 1 11 inches insertion loss dc - 2 0.2 0.6 db 2-6 0.4 1.0 6-10 0.6 1.3 10-18 0.8 1.7 return loss dc - 2 20 44 db 2-6 20 38 6-10 16 33 10-18 16 30 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com proper cable connection using anti - torque nut mini - circuits 086- series h andf lex? interconnect cables are constructed with an anti - torque nut adjacent to the connector coupling nut. when used properly, this feature prevents possible damage to the cable due to torqueing and twisting when tightening the cable connector. to properly tighten the cable connector: 1) the cable connector includes a coup ling nut which rotates to fasten the connector, and an anti - torque nut, which is fixed to prevent the cabl e f rom twisting during connection. 2) to properly t ighten the cable, us e a standard 1 / 4 -i nch open end wrench t o brace the anti-t orque nut. 3) u sing a 5/16 - inch open end wrench, rotate the coupling nut clockwise to tighten the cable connector. * note: mini - circuits recommends using a 5/16 - inch open end wrench calibrated t o 8 in ch - pounds maximum torque to prevent damage due to over - torqueing the connector. anti - torque nut coupling nut hold steady rotate clockwise
|