cxomht 3.3v crystal clock oscillator specification issue 2; january 2016 outline (mm) -sm1 = sm1 std shock (gold plated, rohs compliant) description an increasing number of applications require the use of high temperature oscillators. for these applications iqd o ffers statek' s cxomh t oscillator . this oscillator is designed to operate at temperatures up to 225c with high shock survivability. -hg-sm1 sm1 high shock (gold plated, rohs compliant) -hg-sm5 sm5 high shock (solder dipped, rohs compliant) -sm1 sm1 std shock (gold plated, rohs compliant) -sm5 sm5 std shock (solder dipped, rohs compliant) fe atures : high temperature operation up to 225c excellent over temperature fast start-up high shock resistance cmos and ttl compatible optional output enable/disable low emi emission hermetically sealed ceramic package applic ations : industrial - downhole instrumentation rotary shaft sensors underground boring tools please note that all data is only valid at 25c unless otherwise stated. frequency parameters frequency 320.0khz to 50.0mhz 50.00ppm frequency tolerance @ 25c tolerance condition frequency stability 100.00ppm to 250.00ppm 5ppm max in 1st year at 25c ageing ageing: 100pm max @ 200c operable temperature range: -55 to 225c electrical parameters 3.3v 10% supply voltage absolute maximum supply voltage: -0.5v to 7.0v operating temperature ranges 25 to 150c 25 to 175c 25 to 200c 25 to 225c output details output compatability cmos drive capability 15pf printed on 28 apr 16 12:40 using model data sheet v1.2550 page 1 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
cxomht 3.3v crystal clock oscillator specification output control enable/disable (en): logic 1 to pad 1, output enabled logic 0 to pad 1, output disabled, output goes to high impedance state, internal oscillator stops, therefore current consumption is very low but output recovery is delayed. no connection (nc): pad 1 no connection tri state (ts): logic 1 to pad 1, output enabled logic 0 to pad 1, output disabled, output goes to high impedance state, internal oscillator continues to function, therefore current consumption is lower than normal but output recovery is immediate. start up time: 5ms max environmental parameters shock: standard version: 3000g, 0.3ms, 1/2 sine high shock version (hg): 10000g, 0.3ms, 1/2 sine vibration mil -std-202g, method 204d, condition d: 20g, 10-2000hz swept sine storage temperature range: -55 to 125c manufacturing details maximum process temperature: 260c (20secs max) ordering information frequency* model* shock option* termination variant * output frequency tolerance (@ 25c)* frequency stability (over operating temperature range)* operating temperature range * supply voltage pad 1 function* (*minimum required) shock options: blank = standard shock -hg = high shock termination variants : sm1 = gold plated sm5 = solder dipped note: non-rohs compliant terminations are available - please contact an iqd sales o ffice pad 1 function options: en = enable/disable nc = no connection ts = tri state example: 10.0 mhz cxomh t 3.3v sm1 cmos 50ppm 175ppm 25 to 200c 3.3 v ts compliance optional rohs status ( 20 11 /65/eu) compliant reach status ms l rating (jdec-std-033): not applicable printed on 28 apr 16 12:40 using model data sheet v1.2550 page 2 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
cxomht 3.3v crystal clock oscillator specification packaging details tape & reel in accordance with eia-481-d pack style: reel pack size: 1,000 supplied on a tray pack style: tray pack size: 1 electrical specification - maximum limiting values 3.3v 10% frequency min frequency max temperature range stability (min) current draw rise and fall time duty cycle c ppm ma ns % 6 10 25 to 225 320.00khz 50.0mhz 40/60% - 6 10 25 to 150 40/60% - 6 10 25 to 175 40/60% - 6 10 25 to 200 40/60% - this document was correct at the time of printing; please contact your local sales office for the latest version. click to view latest version on our website. printed on 28 apr 16 12:40 using model data sheet v1.2550 page 3 of 3 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web : www.iqdfrequencyproducts.com
|
