74LV86A document number: ds35665 rev. 1 - 2 1 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a quadruple 2-input ex culsive or gates notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. click for ordering information description the 74LV86A provides provides f our independent 2-input exclusive or gates with standard push-pull outputs. the device is designed for operation with a power supply range of 2.0v to 5.5v. the inputs are tolerant to 5.5v allowing this device to be used in a mixed voltage environment. the devic e is fully specified for partial power down applications using i off . the i off circuitry disables the output preventing damaging current backflow when the device is powered down. the gates perform the boolean function: b a y ? ? or b a b a y ? ? pin assignments features ? wide supply voltage range from 2.0v to 5.5v ? sinks or sources 12ma at v cc = 4.5v ? cmos low power consumption ? i off supports partial -power down operation ? inputs or outputs accept up to 5.5v ? inputs can be driven by 3.3v or 5v allowing for voltage translation applications. ? schmitt trigger action at all inputs ? esd protection tested per jesd 22 ? exceeds 200-v machine model (a115) ? exceeds 2000-v human body model (a114) ? exceeds 1000-v charged device model (c101) ? latch-up exceeds 100ma per jesd 78, class i ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) applications ? general purpose logic ? power down signal isolation ? wide array of products such as: ? pcs, networking, notebooks, ultrabooks, netbooks ? computer peripherals, hard drives, cd/dvd rom ? tv, dvd, dvr, set top box
74LV86A document number: ds35665 rev. 1 - 2 2 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a pin descriptions pin number pin name description 1 1a data input 2 1b data input 3 1y data output 4 2a data input 5 2b data input 6 2y data output 7 gnd ground 8 3y data output 9 3a data input 10 3b data input 11 4y data output 12 4a data input 13 4b data input 14 vcc supply voltage function table inputs output a b y l l l l h h h l h h h l logic diagram absolute maximum ratings (note 4) symbol description rating unit esd hbm human body model esd protection 2 kv esd cdm charged device model esd protection 1 kv esd mm machine model esd protection 200 v v cc supply voltage range -0.5 to 7.0 v v i input voltage range note 4 -0.5 to 7.0 v i ik input clamp current v i < 0v -20 ma i ok output clamp current v o <-0v -50 ma i o continuous output current - 0.5v < v o v cc + 0.5v +/- 25 ma i cc continuous current through vcc 50 ma i gnd continuous current through gnd -50 ma t j operating junction temperature -40 to 150 c t stg storage temperature -65 to 150 c p tot total power dissipation 500 mw note: 4. stresses beyond the absolute maximum may result in immediate failure or reduced reliability. these are stress value s and device operation should be within recommend values.
74LV86A document number: ds35665 rev. 1 - 2 3 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a recommended operating conditions (note 5) symbol parameter conditions min max unit v cc supply voltage ? 2.0 5.5 v v i input voltage ? 0 5.5 v v o output voltage ? 0 v cc v i oh high-level output current 2.0v ? -50 ma 2.3v to 2.7v ? -2 a 3.0v to 3.6v ? -6 ma 4.5v to 5.5v ? -12 ma i ol low-level output current 2.0v ? 50 a 2.3v to 2.7v ? 2 ma 3.0v to 3.6v ? 6 ma 4.5v to 5.5v ? 12 ma ? t/ ? v input transition rise or fall rate 2.3v to 2.7v ? 200 ns/v 3.0v to 3.6v ? 100 4.5v to 5.5v ? 20 t a operating free-air temperature ? -40 +125 c note: 5. unused inputs should be held at v cc or ground. electrical characteristics symbol parameter test conditions vcc t a = -40 to +85c t a = -40 to +125c unit min max min max v ih high-level input voltage ? 2.0v 1.5 ? 1.5 ? v ? 2.3v to 2.7v v cc x 0.7 ? v cc x 0.7 ? ? 3.0v to 3.6v v cc x 0.7 ? v cc x 0.7 ? ? 4.5v to 5.5v v cc x 0.7 ? v cc x 0.7 ? ? v il low-level input voltage ? 2.0v ? 0.5 ? 0.5 v ? 2.3v to 2.7v ? v cc x 0.3 ? v cc x 0.3 ? 3.0v to 3.6v ? v cc x 0.3 ? v cc x 0.3 ? 4.5v to 5.5v ? v cc x 0.3 ? v cc x 0.3 ? v oh high-level output voltage i oh = -50 a 2.0v to 5.5v v cc -0.1 ? v cc -0.1 ? v i oh = -2ma 2.3v 2.0 ? 2.0 ? i oh = -6ma 3.0v 2.48 ? 2.48 ? i oh = -12ma 4.5v 3.8 ? 3.8 ? v ol low-level output voltage i ol = 50 a 2.0v to 5.5v ? 0.1 ? 0.1 v i ol = 2ma 2.3v ? 0.4 ? 0.4 i ol = 6ma 3.0v ? 0.44 ? 0.44 i ol = 12ma 4.5v ? 0.55 ? 0.55 i off power down leakage current v i or v o = 0 to 5.5v 0v ? 5 ? 5 a i i input current v i =gnd or 5.5v 0 to 5.5v ? 1 ? 1 a i cc supply current v i = gnd or v cc i o = 0 5.5v ? 20 ? 20 a
74LV86A document number: ds35665 rev. 1 - 2 4 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a switching characteristics symbol parameter test conditions v cc t a = +25c -40 to +85c -40 to +125c unit min typ. max min max min max t pd propagation delay a n to y n figure 1 c l =15pf 2.5v 0.2v - 7.9 17.6 1 21 1 22 ns 3.3v 0.3v - 5.5 11 1 13 1 14 5.0v 0.5v - 3.7 6.8 1 8 1 9 figure 1 c l =50 pf 2.5v 0.2v - 10.5 22.6 1 26.5 1 27.5 ns 3.3v 0.3v - 7.4 14.5 1 16.5 1 17.5 5.0v 0.5v - 5.3 8.8 1 10 1 11 operating characteristics t a = +25c parameter test conditions v cc typ unit c pd power dissipation capacitance per gate f = 10mhz c l = 50pf 3.3v 8.4 pf 5.0v 8.8 noise characteristics v cc = 3v, c l = 50pf t a = +25c symbol parameter min typ. max unit v ol(p) quiet output, maximum dynamic v ol ? 0.2 0.8 v v ol(v) quiet output, minimum dynamic v ol ? -0.1 -0.8 v v oh(v) quiet output, minimum dynamic v oh ? 3.1 ? v v ih(d) high level dynamic input voltage 2.31 ? ? v v il(d) low level dynamic input voltage ? ? 0.99 v package characteristics symbol parameter test conditions vcc min typ. max unit c i input capacitance v i = v cc ? or gnd 2.0 to 5.5v ? 3.3 10 pf
74LV86A document number: ds35665 rev. 1 - 2 5 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a parameter measurement information v cc inputs v m c l v i t r /t f 2.0v to 5.5v v cc <3ns v cc /2 15pf or 50pf voltage waveform pulse duration voltage waveform propagation delay times inverting and non inverting outputs notes: a . includes test lead and test apparatus capacitance. b. all pulses are supplied at pulse repetition rate 10mhz c. inputs are measured separat ely one transition per measurement d. t plh and t phl are the same as t pd figure 1. load circuit and voltage waveforms
74LV86A document number: ds35665 rev. 1 - 2 6 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a ordering information device package code packaging (note 6) 13? tape and reel quantity part number suffix 74LV86As14-13 s14 so-14 2500/tape & reel -13 74LV86At14-13 t14 tssop-14 2500/tape & reel -13 note: 6. the taping orientation and tape details can be found at http://w ww.diodes.com/datasheets/ap02007.pdf marking information (1) so14, tssop14 part number package 74LV86As14 so-14 74LV86At14 tssop-14
74LV86A document number: ds35665 rev. 1 - 2 7 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a package outline dimensions (all dimensions in mm) package type: so-14 package type: tssop-14 so-14 dim min max a 1.47 1.73 a1 0.10 0.25 a2 1.45 typ b 0.33 0.51 d 8.53 8.74 e 3.80 3.99 e 1.27 typ h 5.80 6.20 l 0.38 1.27 ?? 0 ? 8 ? all dimensions in mm tssop-14 dim min max a1 7 (4x) a2 0 ? 8 a 4.9 5.10 b 4.30 4.50 c ?? 1.2 d 0.8 1.05 f 1.00 typ f1 0.45 0.75 g 0.65 typ k 0.19 0.30 l 6.40 typ all dimensions in mm g l a k a 1 d c a 2 f f1 pin# 1 indent detail ?a? detail ?a? 0 . 2 5 gauge plane seating plane b e h a a2 e d a1 l gauge plane detail ?a? detail ?a? 7 ( 4 x ) ? b
74LV86A document number: ds35665 rev. 1 - 2 8 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a suggested pad layout package type: so-14 package type: tssop-14 dimensions value (in mm) x 0.60 y 1.50 c1 5.4 c2 1.27 dimensions value (in mm) x 0.45 y 1.45 c1 5.9 c2 0.65 x c1 c2 y x c1 c2 y
74LV86A document number: ds35665 rev. 1 - 2 9 of 9 www.diodes.com october 2013 ? diodes incorporated preliminary 74l v 86 a important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described her ein; neither does diodes incor porated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes in corporated and all the companies w hose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability what soever in respect of any pr oducts purchased through unauthoriz ed sales channel. should customers purchase or use diodes in corporated products for any unintended or unauthorized application, customers shall i ndemnify and hold diodes incorporated and its representatives harmless agai nst all claims, damages, expenses , and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or mo re united states, international or foreign trademarks. this document is written in english but may be translated into mu ltiple languages for reference. only the english version of t his document is the final and determinative format re leased by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical co mponents in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when prop erly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support dev ices or systems, and acknowledge and agree that they are solely responsible fo r all legal, regulatory and safety -related requirements concerning their products and any use of diodes incorporated products in such safety-cri tical, life support devices or systems, notwithstanding any devic es- or systems- related information or support that may be provided by diodes inco rporated. further, customers must fully indemnify diodes inc orporated and its representatives against any damages aris ing out of the use of diodes incorporated products in such safety-critical, life su pport devices or systems. copyright ? 2013, diodes incorporated www.diodes.com
|
